5Sterne
14Bewertungen4Sterne
4Bewertungen3Sterne
2Bewertungen2Sterne
0Bewertung1Stern
1Bewertung
15 Rezensionen
Just the job
For steering head bearings I've previously just used a big screwdriver and copper hammer and not had any issues but I thought I'd give this a go.
Good job I did as once I stripped down the SFV650 I was working on there were no cutouts to accommodate a drift: it would have been difficult to get any purchase without a specialist tool.
This is a simple tool but solid, well made and does the job well - hook the lip behind the race, tighten up and knock it out from behind.
It won't pull blind bearings but as it says on the tin it's designed for steering heads.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: buycarspares2
sealey motocycle steering bearing race removal tool
A purposeful designed tool. with good durability to take copper mallet strikes. It has to be used with a drift, which is available separately. Or any suitable socket on an extension bar. I was pleasantly surprised at the ease I was able to extricate a stubborn inner roller bearing race that was blind recessed in the steering tube. A real cost effective tool to take away all the frustration from using the bodging hammer and chisel method.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: buycarspares2
Excellent
I used this tool to remove the outer head/stem bearing races on my CBR600FV/3.
It absolutely did the job!
Of course, it's a 'special tool' so I may never use it again.
You can use a homemade drift to do the job and save the expense but this tool makes the job a whole lot faster, easier and reduces the risk of damaging the bike's frame.
I used a an offcut of steel bar to transmit the force from the hammer to the tool.
Recommended.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: demontweeksdirect
A little pricey, but well-made and gets the job done!
I've bought specialist application tools before and been disappointed, so I was a little unsure if this would work or not. I'm pleased to say it did the job perfectly; I used two 1/2" ratchet extension bars and a large socket as a tool driver and the bearing race came out in seconds. Unless you work on motorcycles for a living, this won't be a tool you use often; when needed though, it will do the job for which it was intended.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: demontweeksdirect
Perfect for those hard to reach races seemingly embedded in the headstock. A few taps and it's out. Robust and easy to use. Quite expensive for what i
Expensive but Very Useful.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: demontweeksdirect
Make life easy with this tool
Used every other day and still in one piece. Good quality and can be used on most models
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: demontweeksdirect
Race bearing removal tool
This is a good piece of kit, well made and should do the job in most circumstances as long as your vehicle is not built to defeat an amateur mechanic (as my vintage Ducati clearly is). I will use this tool for many happy years to come so thanks.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: buycarspares2
Doesn't suit all bikes
well made but needs work with a dremmel to use on BMW airheads.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: thetoolacademy
it works if there is small space behind bearing race
Lip of this tool was too thick for lower bearing race removal in new harley bike.Upper bearing race was rermoved with this no broblem.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: aceparts_uk
Great puller
Well made and does exactly what it is intended to.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: demontweeksdirect