5Sterne
436Bewertungen4Sterne
42Bewertungen3Sterne
7Bewertungen2Sterne
1Bewertung1Stern
7Bewertungen
Would recommend99% stimmen zu
Good value98% stimmen zu
Good quality97% stimmen zu
466 Rezensionen
Job Done - Permanently
Perfect epoxy for applications where components get hot in use. Standard epoxies can be melted by boiling water, so are no good for car cooling system projects. Easy to use and performing well so far. Not suitable for "quick fixes" because the setting time is fairly long. Can apparently be machined, but I didn't need to and I liked the dark grey finish.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: redlineoils
Totally satisfied with this product!
Worked perfectly to mount back the metal heatsink brackets on the stacked fiberglass layers of my notebook motherboard (ASUS ROG GL552JX).
I had my doubts regarding this matter because I saw an article online about someone not being able to get it fixed using epoxy resin. However, decided to give it a go with JB Weld and now the brackets don't seem to detach anytime soon!
Just follow the instructions (degrease and roughen surfaces a bit) and don't be shy putting a little extra on the outer side of the bound once in place, since JB Weld is not electrical conductive. Allow to cure 24h for safety and you're good to go :)
Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: redlineoils
Easy to use and handy for emergency repairs etc.
Easy to use, hardly any oudour, doesn't run and end up in places you didn't intend for it to go and it's "no big deal" if you get some on your hands while appying it because it's very easy to clean off your hands. Excellent for reinforcing less well made electronic gadgets' often wobbly fixtures before they break off and bonding the connecting wires etc was my main reason for buying it as well as being handy stuff have in the home tool bin when stuff breaks. Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: xtremeautos
Sets like iron and simple to use.
I bought a post box for my daughters wedding a few years ago, and when I found it again it was battered and rusty. I sanded it down and repainted it, but the lock was broken and I had to force it off. Genuine locks were very expensive and I couldn't find one anyway, so I bought a lock and key of similar size, but the mounting holes were not the right size. I put one screw in and before I tightened it up I put your product on the pillars which held the lock. After 24 hours your product had set rock hard and held the lock securely. I used the key on the lock, and it worked a treat, saving me a lot of time and money. The bond seems fine and I was able to sand, any excess, down. It was very easy to use and sold at a very reasonable price. I was delighted I had discovered your product and would recommend it to anybody. Thanks. Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: xtremeautos
One of the best epoxy adhesives around
This has to be one of the best epoxy glues you can get! I didn't realise that it had been around since 1969! I have used this glue for many applications, including re-cementing a rare projector lamp to its base, where the temperature resistance (up to 287°C) meant it wouldn't burn. Ordinary epoxies wouldn't have been able to withstand the heat. Recently, I used it to repair a bakelite saucepan handle where again, heat resistance was important. My only minor issue with this glue, is that it can be very thick, in particular the grey adhesive component. This can be improved by adding a small amount of acetone to the mix (just a drop or two!), which dilutes it a bit. The other thing is the long cure time, although this can be speeded up by warming up the article you are repairing. Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: exiteukfirst
Jb cold weld Jb weld
Was totally sceptical at first to be honest if it would work, but done a few small jobs with it so far and it has stood up to the task perfectly,I even repaired my activity air fryer which gets super hot what I needed to fix and for weeks now it’s lasted with no issues at all,I’d say it’s even stronger than the original part as that flexed slightly where’s Jb weld it absolutely solid.
Got to test it on a slight leak on my exhaust today so that will be a good test to see how well it holds up but if all the other reviews are genuine then it should definitely do it,fingers crossed,but I recon it will as done everything else I’ve used it for up to date.
Cheap price to and haven’t got to use it all in one go unlike some others as it’s a resealable tube and a little actually goes quite a long way.
Can’t fault it at all really as worked well for my jobs whereas ALL other super glues ect have failed big time.
Personally I recommend this stuff and for a fiver just over you can’t really go wrong.
Top marks so far 👍👍👍Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: xtremeautos
I used this product to stick back my rear view car mirror which is quite a heavy item. It’s very strong and easy to use, I did leave it for 24 hours t
I used this product to stick back my rear view car mirror which is quite a heavy item. It’s very strong and easy to use, I did leave it for 24 hours to fully cure before refitting the mirror.
I highly recommend the product but be careful to only end up with where you want it.
Seller was extremely helpful. Happy all round!Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: exiteukfirst
Great Product
Good price, very easy to use and excellent results once fully cured. I found that the cure times were slightly longer when outside due to lower temperatures, so I factored this in for future jobs.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: exiteukfirst
Outstanding metal repair material
I have been using JB Weld for twenty five years> I first used it to salvage a cast aluminium air-cooled Suzuki cylinder head. The exhaust mounting stud had broken the casting and I had nothing to loose. I was able to build a replacement in situ using the JB Weld. I chose to leave it for a couple of days before drilling it and tapping and thread into the JB Weld to take the stud. I had tha bike for another four years, covering about 18,000 miles and the repair was as good as the day I made it when I sold the bike. Subsequently I have used JB Weld to repair any number of metal parts and re-fix where spot welds have failed or where I needed to build up or join parts. It seems impervious to fuels and oils, as well as air cooled engine temperatures. As a result I always keep some "In-Stock" in my garage.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: exiteukfirst
Excellent, hard ,repair epoxy.
This epoxy is very strong, but be aware it does not cure as quickly as say Plastic padding, you must clamp or fix the components so they can cure for 24 hours in position. I use it when fixing metal breakages or joining. I have just repaired a broken North/South Lead ( that is the metal Lead) arm of my old Weather vane. It has made a great job. It is important that you clean the repair or joining area thoroughly before using this product, I am certainly happy with it. Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: sunniguy