1.71.7 von 5 Sternen
18 Produktbewertungen
  • 5Sterne

    1Bewertung
  • 4Sterne

    0Bewertung
  • 3Sterne

    2Bewertungen
  • 2Sterne

    4Bewertungen
  • 1Stern

    11Bewertungen

16 Rezensionen

von

Eezibleed multipurpose cap.

I own a honda eezibleed dont mention on the kits there kit doesnt fit hondas toyotas and some others. Then had to by this. Lid fits on flat resevoir ok but the tie you use has nobbles on it so you are limited to there spacing. Wasnt tight enough brake fluid sprayed everywhere. Had to tighten by using tywraps under nobbles to increase pressure to tighten . Then worked. To much messing around shouldnt have to at these prices. Wasnt happy bunny. The bleeder tightening method needs a rethink. Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: apd_car_parts

von

Ok, but....

The Gunson bleeder kit is a good tool IF you have a screw on cap/master cylinder. My experience with both of their "universal" caps has been rubbish.

Having taken considerable care making the cap seat properly on my reservoir, without brake fluid in the bleeding tool, it then failed with fluid in it and sprayed brake fluid down the back of my engine bay because the rubber strap doesn't apply even pressure on both sides.

Next day I bought a "one man" bleed bottle for £5.99, bled the brake I had fitted a new hose and caliper to, and changed the rest of the brake fluid in the whole system.
Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: demontweeksdirect

von

Great product poor customer service

Great product, In was disappointed to pay £6.99 for Parcelforce 24 my request for a Sat delivery was ignored and I was not replied to until Sunday after I had messaged them as to why my parcel was stuck in the York depot on Sat morning.
I was not offered the chance to pay any extra p and p to get faster post by the seller.I waited in on Saturday for nothing and could not start work on my car as I needed this accessory to bleed my brakes. It arrived on the same day it would have arrived with the free post option, because it was tracked I had to go and collect from the courier.

Far from impressed.

Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: apd_car_parts

von

Failed to deliver

The product does not fit the bill at all, whilst it is recommended for unconventional reservoir sizes, it is not fit for purpose. It fails to make the right seal and you end up with Brake Fluid all over the engine bay.Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: jjcraceandrally

von

Useless and heres my experience

Well made item but it was totally useless in its job. I needed it for a Nissan figaro which has an oversized brake reservoir cap. I'm a maintenance engineer with over 40yrs of experience and I couldn't get it to seal. I even tried an F-clamp but again not seal. I feel the issue is the material that is expected to make the seal is high density foam when maybe it should be a rubber/silicone gasket material. Whatever, its a total flop and I got job done with a 2nd person on the brake pedal. I expected better of Gunson!Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: simonbbc

von

Waste of money

Purchased for bleeding the brakes on my classic car; I needed this piece as the master cylinder was larger than the caps supplied with the Eezibleed kit.
Despite the master cylinder being new, the item wouldn’t seal properly and allowed brake fluid to leak all over the area that I had nicely cleaned and painted owing to years of brake fluid corrosion! Very annoying but thankfully I am now using a DOT5 silicone brake fluid, to prevent further damage.
Also I feel that because the seal is a sponge type rubber it is slightly porous allowing leakage, as opposed to a solid rubber seal as fitted to the caps in the kit.
I overcame the faulty item by modifying an old master cylinder cap, which was much more effective.
Another gripe when using this item is that you have to cut the existing filler cap hose to allow fitting, as it it not just a straight swap.
Shame really as it wasn’t cheap.
Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: simonbbc

von

Did not work on this occasion

In theory it looks like it should work. But in reality it does not. The method to attach the cap to the (square) master cylinder has to be an even pressure to make a good seal, without that it is useless. I spent ages to trying to seat this cap without air leaking out. eventually had to give up.Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: the-right-tool

von

Good concept poorly implemented

I highly rated the main Gunson Pressure bleeding kit. This accessory doesn't look like it's going to work when you remove it from the packaging and it didn't for me despite many attempts. I could not get it to seal correctly, even at low air pressure. Luckily, I didn't get as far as adding brake fluid to the bottle otherwise by now it would have sprayed everywhere.Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: jjcraceandrally

von

Ok when seal is made but can be tricky.

Making a seal was quite tricky with the rubber strap was not quite good enough I used two F clamps to secure the cap evenly to the brake reservoir otherwise DOT 4 would spay out.

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: simonbbc

von

Unbrauchbar, weil undicht

Die Kappe scheint ja erst mal eine geniale Idee zu sein, soll sie doch auf alle möglichen Bremsflüssigkeitsbehälter passen. Passen tut sie schon, obwohl die Befestigung mit dem Gummiband etwas frickelig ist.

Leider macht sie aber nicht das, was sie machen sollte, nämlich DICHT SEIN.

Zumindest ist das bei meinem Honda Jazz so.

Versucht man nun das Gummiband straffer zu spannen, dann verbiegt sich die Plastikkappe, dadurch wird das Teil aber wiederum undichter.

Sollte man unter diesen Umständen Bremsflüssigkeit in der Eezibleed Flaschen haben, dann würde die sich schön im Motorraum verteilen - nicht zu empfehlen.

Ein Rückversand mit Sendungsverfolgung nach Großbritannien kostet aber immer über 10€, Deshalb lasse ich das und ärgere mich einfach nur.
Vollständige Rezension lesen

Bestätigter Kauf:  JaArtikelzustand: neuVerkauft von: topratedtoolsuk

Warum ist diese Rezension nicht zulässig?

1 - 10 von 16 Rezensionen