- Alle
- Neu
- Gebraucht
5Sterne
79Bewertungen4Sterne
9Bewertungen3Sterne
3Bewertungen2Sterne
1Bewertung1Stern
3Bewertungen
81 Rezensionen
Anycubic i3 Mega 3D Printer is an excellent purchase.
The Item arrived well packed, easely assembeled, excellent documentation.
Test howl printed great.
Con:
Takes a bit a time to level the hot plate, not autoleveling.
Conclusion:
Very happy with the product, price vs quality is great.Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
Super Priced 3D prniter that will blow you away!
Easy to assemble and works beautifully once you get the print temp. and bed conditions right.
Highly recommend using the hairspray trick .... Clean the bed with alcohol, then a light dusting with any old hairspray and you're good to go for the day. I'm using Hatchbox PLA and a nozzle temp of 212c for smaller (less than 1/2" square) parts to get them to stick well. Larger parts stick OK at 190c.
This printer seems to want to use ONLY mm as the measurements for design.... I'm using Sketchup for CAD, Cura4.5 for slicing and it is AWESOME. Other than the temps... I'm just using the basic .2mm layout in Cura.
If you've never 3d printed before.... this is the way to go.
Create in Sketchup. Save the file(makes an .SKP file). Export the file in 3D (makes the .STL file). Then use Cura to slice and create (.G-code).
Transfer the G-code to the included USB 8gb mini SD card , insert it in the printer and refresh.
Of course LEVELING THE BED is a Top Priority. I do it every morning. It seems just right is when it's a little difficult to slide the paper FORWARD, and you get a nice heavy vibration when you pull backwards. If you've ever 3D printed, you'll know what I mean. Good Luck!Vollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
The Yugo of 3d Printer
I have had this Printer for about a week and have not been able to use it. Just fixing it. Correction on the TFT board sparatic Z axis connection. I have ordered my own replacement parts because it's the Chinese New year's so it will be forever to get any help. I will see if the parts "I ORDERED " will fix the problems If not I'm going to put on YouTube running this POS over with my truck. I'll have to save up to get another Printer from a company that believes in qualityVollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
Great quality prints, easy to use
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
nice prints easy to use
easy to set up , was printing the same day
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-resin-...
Nice Printer
Printer is very easy to assemble and prints well. Very quiet compared to my other printers. Touch screen interface is easy to understand and use.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
Absolutely love it
The prints are clean, it's easy to set up. I absolutely love it
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-printer
Great printer/laser engraver at a very good price
This printer has a very good and solid construction with a full steel housing. Low noise when printing with high precision 3D prints. The laser tool is so cool! Very easy to use 15 minutes after unpacking.
The only problem is the front / left corner of the bed was too low and not adjustable properly with the springs system underneath. I installed 4 new silicone buffer with some washers and one supplementary one under the left / front corner and now the bed can be leveled properly for all corners.
There was also a plastic strain relief on the rear / right spring. This is not a good idea as it can cause a problem with leveling the bed ... I throw it out anyway for installing the silicone padVollständige Rezension lesen
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-printer
Nice one machine that does 3d and laser. Would recommend at this time
Was able to put together quickly and easily. So far I've done 2 products with the filament and done 2 laser products. Look good so far.
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official
Excellent Quality, Performance and price
We are been doing face shield masks for first responders and the printer works like a champ 100% recommended also easy to install
Bestätigter Kauf: Ja • Artikelzustand: neu • Verkauft von: anycubic-official