5Sterne
22Bewertungen4Sterne
0Bewertung3Sterne
3Bewertungen2Sterne
1Bewertung1Stern
1Bewertung
Would recommend92% stimmen zu
Good value88% stimmen zu
Good quality92% stimmen zu
19 Rezensionen
Not very precise tool
This lens tool is supposed to fit the notches in the retaining rings on the backside of large format lens boards. The tool fit Copal #1 shutter ring precisely, but it was a fraction of a millimetre too tight to fit Copal #0 shutter rings. I expected it to fit and before I realized that it doesn't fit in the notches, the tool slipped and scratched the lens barrel.
I had to use a metal file and modify the tool in order to make it fit the #0 shutter rings. I have not used it for #3 rings, since I don't have any shutters that size so I don't know if it fits or not. Other than that, the tool is made of stainless steel and works as intended after modification. The tool has sharp edges so you have to be very careful about slipping, it will scratch the lens/lens barrel. It was $7.00 cheaper than the Rodenstock tool sold in camera stores.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008
Copal lens retainer ring wrench
Does exactly what is intended, though has a very reflective mirror-like finish to it... which can be distracting or alternatively used as a signaling tool! Worked fine though snug fit to tighten down retainer rings on Copal shutters.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008
Valuable tools
Don't use a pair of pliers, a screw driver or a rusty nail for that matter, there's a better high precision tool created just for the job. Copal one, two, or three retaining rings have always been problematic for the end user to dismantle lens from lens board because of over tightening. This precision cut metal plate is the perfect fit for you copal shutter without the worry of scratching the retaining ring or damaging the copal assembly during the process.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008
OK but rough
Rough, sharp machined edges with overly-tight tolerances make it easy to scratch lens rings and lens boards. You will need to spend some time with a file to clean up the tool before use.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008
Just what you need!
Very strong,easy to use. Makes changing lenses fast and safe.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mytongguy
Cheap, dangerous razor sharp metal
This is pressed metal, razor sharp edges not machined at all. A similar price could get you something safe and less cheep feeling
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: myhoyeah
Spanner Wrench,
it is Extremely well machined in what seems to be stainless steel, and it work very well, and I have no complaint,
Excellence product,
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mytongguy
Works, simple, necessary sometimes
its just a simple wrench for large format lens retaining rings for shutters and the lens board. But it works. Don't leave home without one if you need to change a lens on a board :-)
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mytongguy
the best
One of these little tools that makes life easier
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008
Well made tool
Very durable, long lasting tool. Might be better if the tangs were slightly thinner to fit into the slots on retaining rings better, but works well as it is.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ecbuyonline2008