5Sterne
19Bewertungen4Sterne
2Bewertungen3Sterne
1Bewertung2Sterne
0Bewertung1Stern
0Bewertung
Would recommend75% stimmen zu
Good value50% stimmen zu
Good quality66% stimmen zu
19 Rezensionen
Great product. Just take your time with fitting.
Fitting this hugger extender is a bit more involved than fitting the front mudguard extender due to there being a lot less clearance. It might be easier to use the sticky pads with it all in-situ, but I prefer to use the studs because they are far more secure.
I removed the hugger (breaking one of Yamaha's cheap plastic clips in the process!) so that I could easily drill the four holes with it all on the bench. In addition to the supplied studs, I used some black silicone on the mating surfaces to hold it firm and stop the muck getting in there.
When re-fitting the hugger I replaced Yamaha's front plastic clip with an allen screw and nylock nut, using the remaining Yamaha clip in the right hand swingarm hole. Also, I placed a piece of wood between the tyre and the hugger before tightening all the screws so that maximum clearance was achieved.
Although sceptical at first, I actually prefer the black studs to the self tapping screws that used to be supplied with these extenders. The studs are unobtrusive, making the extender look like it's meant to be there. Hopefully it should help to keep some of the road muck off the rear shock.Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...
MT07 Tracer Hugger
Thought £34 for a bit of plastic was a bit steep,but,I’m really impressed with it.The quality,finish,and fit are all great.Fitting is simple,once you’ve removed the guard from the bike.I used both the sticky pads and the plastic rivets for extra security when fitting.Looks good and adds protection from the elements..RecommendedVollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: raywilliamsmoto...
Easy to fit when you know how
Looks good & easy to fit. I have a paddock stand & angle drill so just fitted it on the bike and didn’t follow pyramid instructions which say you should remove the existing hugger (this is because I’ve read reports of the existing clips being hard to move and breaking easily)Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: raywilliamsmoto...
Small but effective
Fits well, best to remove the existing guard first, used the plastic fasteners as well as the sticky pads all in the kit.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...
Does the Job
Used the adhesive pad / stick-on option, and it seems to be holding firm, and has significantly reduced the amount of water spray, dirt, salt etc. being deposited on the rear shock, gearbox and engine. A lot of money for a piece of plastic, but it did of course have to be designed to fit accurately, moulds made etc, and is probably not being sold in huge volumes. Did the job – Thanks!Vollständige Rezension lesen...
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: ammo120
Fits perfectly
Fits really good. Make sure that you have a couple of spare plastic Yamaha screws because the easily snap.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: motorcycle-part...
MT07
So easy to fit and looks good
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...
Fits well
Easy to fit looks great
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...
Good product.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...
FITS A TREAT
Provided you follow the instructions EXACTLY, the hugger looks good and does the job it`s meant to.
Bestätigter Kauf: Ja | Artikelzustand: neu | Verkauft von: mooresmotorcycl...