I have used the schultz can suction type waxing guns, which are ok, but the adaptor for spraying cavities doesn't evenly spray or really atomize the wax. This sealey gun does a much better job of wax spraying as its a pressurized gun, the 360 cavity adaptor sprays a solid 360deg mist, the small wand is really handy fi reaching difficult spots. spend the extra money and get a pressurized pot was sprayer if you are wanting to do a proper job.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Stupidly, this is the second Sealey SG18 wax injection gun I've bought, because I had the couplings from the first one, so thought 'I can reuse them'. I bought this to replace the first one which worked for a few jobs then just failed to regulate the air/contents mixture properly. Bear in mind I use airguns for painting, I know how to strip and clean air guns. The seals and system is just not designed to work for long, and so fluid just leaks out with trigger released, and the pressure regulation is dire. 'You get what you pay for' is so true with this product. Spent hours trying to get them both to work again. Huge waste of time. Avoid.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Bought kit as previous sprayer which screwed into litre bottle was not able to spray waxoyl out of tube in order to treat cavities- probably too little pressure and different way that wax is drawn up from reservoir. In this kit the vessel is pressurised directly. In previous sprayer vacuum created at top of vessel by high pressure air. Overall. Works far better than previous sprayer. Sprayed out of tube using about 4 bar pressure. Found took few seconds to pressurise container before wax came out of tube. When stopped spraying had to leave a few seconds before wax exited again. Spray quite fine. I am going to try 6 bar pressure next time. Overall pleased but at 60 quid plus far too much for a pressurised metal container, 2 lengths of silicone tubing and 2 metal spray heads.
Bestätigter Kauf: Ja | Artikelzustand: Neu
New out of box the trigger was very stiff. When trigger released it stayed open. It would not pass wax at max air pressure unless thinned to solvent consistency. Haven’t been able to use it. Went back to cheap machine mart tool. No help from suppliers. Wouldn’t recommend.
Bestätigter Kauf: Ja | Artikelzustand: Neu
replacement for previous model, looks identical but seals are smaller and spares not sold for that model. Sealeys rrp of £160 VERY EXPENSIVE, but £84 is acceptable. Expensive but does the job and well made. pity about lack of spares backup.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Well built and positive feed with a high pressure. Application pipes work well and essential for hidden but vital application. Container very robust and I place on a heat pad to warm it up and this keeps the already warmed material in good flowable condition for excellent penetrating application of Waxol. That said it would spray cooled material and I have never had a blockage. Remember to set the compressor below the max opperating pressure for safety reasons.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Bestätigter Kauf: Ja | Artikelzustand: Neu
Not the cheapest in the market, but had all the accessories you need in the box. I completed my old Range Rover in a morning, very pleased with the quality of the kit, no problem in recommending
Bestätigter Kauf: Ja | Artikelzustand: Neu
Having tried and failed with other cheaper guns, i bit the bullet and bought tbis expensive gun. Heated the dinitrol up and it sprayed really well. Cleaned out canister with white spirit then sprayed it through hoses and its like new
Bestätigter Kauf: Ja | Artikelzustand: Neu
Works really well, a must if you are doing a waxoil job. Still best to warm the waxoil but it will cope with most fluids.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Lackierwerkzeuge
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Hier sparen: Lackierwerkzeuge
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Auch interessant
