Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Sonstige
I was sceptical about the potential quality of a 300 bar compressor for c£200. I specifically chose the best in the range as I think the autostop is paramount for safe operation. It was deliverd on the day the supplier said it would be. There was a progress report from the supplier who responded to emails. Out of the box, it is well made and has been built from high quality components. Plugged it in and the pump started to circulate the cooling water. Connected to my 7L divers bottle and equalised the pressure. Both gauges read 170 bar so the pressure gauge on the unit is reading correctly. Set the pressure autostop to 200 bar and started the compressor which ran smoothly upto 200 bar and switched off automatically. Temperature had risen to just over 60C so I let it cool down as the water pump was still running. Reset the autostop to 250bar and restarted the compressor which again pumped up to 250bar and switched off. Temperature was upto about 70C which is as high as I would like to go. I tested the temperature of the cooling water which was upto about 40C, so I added more cold. Reset autostop to 300 bar. Worked perfectly and switched off automatically at 300 bar. Whoopee, I can now fully charge my air rifles.... Points to note: I heated a washing up bowel full of cold tap water to about 45C so make sure you use plenty of cooling water. Much above 70C could start to degrade the seals, depending what the material is. The pressure pipe on the top of the compressor will burn you if you touch it. Be gentle when you open the bleed vent. Do it slowly to avoid a pressure shock on the components. Slight niggles: The threads on the pressure fittings are not BSP so you cannot use standard 1/8 BSP fittings. There was no "This Way Up" stickers on the box so mind arrived on its side so the plastic bag it came in was full of oil and the compressor itself was covered. Cleaned it as best I could but still smells oily when it gets hot. All in all. Does exactly what I want and exacly what it says in the advert. Nice oneVollständige Rezension lesen
Bestätigter Kauf: Ja | Artikelzustand: Neu
Seems pretty well made for the price only time will tell just how good it is. So far so good not as noisy as I expected either just don't go touching the pipes on the cylinder head as they get very hot. I would recommend a second filter system in place as the one supplied isn't really up to the job. For the price would I recommend it hell yeah half the price of a known make is and probably just as good.
Bestätigter Kauf: Ja | Artikelzustand: Neu
So far so good. but i recommend buying an extra inline filter. Not as noisy as i thought it would be . Topping up an air rifle takes a couple of minutes . Topping up a large bottle however takes a long time as it needs to be done in stages. That is, ten minutes at a time with a cooling down period in between.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Good engineering and well put together. The pump comes complete with spare o rings and several blow out caps should they be needed if you exceed the design pressure.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Compact User friendly .compaired to my last one this really good but only used it twice so far .but it dose work.👍
Bestätigter Kauf: Ja | Artikelzustand: Neu