 |
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Ständer & Halterungen
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Auch interessant
If you mount this inside the wall as the pictures show it.. It works perfectly. Let me give you my experience after mounting 3 (so far) of these 1. use template to cut out wall opening in SAME wall cavity as an existing mains or power box. required for charging). 2. get piece of 1x4 wood and cut about 6-8 inches longer then the length or width of the opening 3. disconnect wiring from existing box. insert mains wiring through into wall cavity and pull up to new opening 4. mount new box (inside wall) and attach to existing stud. 5 reconnect all mains wiring and add new box to mains wiring 6. Plug in charger to new box inside wall 7. insert ipad mount into opening and attach 1X4 to back using 2 or 4 wallboard or similar screws. Do not tighten. 8. run 40 pin (or lightening) into slot in end and into ipad 9. Tighten mount to 1X4 and clamp to wall. Do not overighten or you will never get ipad out after you insert it. 10. test fit ipad and verify you can get it out (I find using 2 tiny screwdrivers works best) Once all is fitting good, put ipad in place and you are done. Electricians may argue this is not legal but code in US says " you may not mount an electric box in any location that requires modification of walls to access it". The above method allows you to access it by popping the ipad out removing 2 or 4 screws (holding the 1x4 in place) and removing the mount.Vollständige Rezension lesen
Bestätigter Kauf: Nein
The iPad Mount is the absolute bare necessities for mounting an iPad in the wall. There is no mechanism for mounting the mount - you simply find a place to put some screws through it or use construction adhesive. When you use screws, you can easily distort the shape and make it impossible to get the iPad in the mount. It is a good product, but should be priced much lower considering the cheap design and construction.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Good quality, easy to install and holds the ipad really well. Very happy
Bestätigter Kauf: Ja | Artikelzustand: Neu
Worked perfectly. My only complaint would be that there was no hole for the headphone port. But wasn’t that big of a deal. Other than that worked great. Great use for old iPad 2
Bestätigter Kauf: Ja | Artikelzustand: Neu
Need to make sure you instal this item on the middle of the stud or install backing behind that allows to be centered on the wall as needed.
Bestätigter Kauf: Ja | Artikelzustand: Neu
