Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Reinigungsmittel
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Hier sparen: Reinigungsmittel
I purchased this lube as I wanted a replacement for the lanolin based spray lube which I have been using but which is rather messy to remove from the brass after processing. Lee advertised this product as water soluble. I cleaned a .308 Win sizing die of any old lube and lubricated a couple of cases with the Lee lube per the instructions on the tube. The force required to size the cases was EXCESSIVE. The cases had been fired in a bolt gun and do not require a great deal of sizing. I lubed another case with a generous (excessive) amount of Lee lube. Same issue. I downloaded the Safety Data Sheet from the Lee Precision web site. It indicates that the lube is in fact Castrol Iloform PS 700. The product data for this item from Castrol's web site states in part "It is not recommended for yellow metals." Brass is generally considered a yellow metal I believe. Lee's technical support folks could not explain why they were selling a product which was described by the manufacturer as not suitable for Lee's intended use. Vollständige Rezension lesen
Bestätigter Kauf: Ja | Artikelzustand: Neu
The stuff just works. I put a pea-sizes dollop on each side of the inside of a piece of tupperware, add up to 100 pieces of brass (depending on caliber), and shake/rotate/tumble for about 30 seconds. Haven’t had a stuck case or dented case using this method. The only downside is that you have to wipe off the dried lube when you’re all done loading. Lee says you don’t have to, but I do. It almost polishes the cases too which makes them look better than factory.
Bestätigter Kauf: Ja | Artikelzustand: Neu
I reload a lot of 223 ammo and have never had a stuck case using this product. It works great.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Usually Lee products are great, but this stuff works terrible. I mistakenly ordered when I meant to get Alox. No worries almost anything from Lee's is good. Several 300BO cases have gotten stuck in the resizing die when lubricated with this. And one of the tubes had a nick in it and leaked.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Have tried a couple others but still like how easy this lube is to use. I simply put a dap on my finger tips and rub in before re-sizing Have used on 9mm, 5.56, and .300 BLK. A little goes a long way. Good stuff.
Bestätigter Kauf: Ja | Artikelzustand: Neu