Decided to get these after a few cold but clear rides, after an hour my fingers were aching with wind chill and it was agony using the clutch lever, i'm new to bikes, pretty handy with tools though being an ex car mechanic, these Oxford grips are very easy to fit even for a novice, very clear instructions, there is even a few good Youtube videos on how to fit so you cant go wrong, fitted them to my Ducati Monster 696, i liked them so much, and considered them essential (for Spring in central Scotland) i ordered another set for my Suzuki GSXR600.
Bestätigter Kauf: Ja | Artikelzustand: Neu
I learnt the hard way. Make sure your handlebars are in the straight position and not leaning to the left like us bikers like to leave them when we park up. If you leave the bars to the left when you install your new hot grips, when you come to use the glue it will run down the inside of the throttle housing and will quickly go hard, resulting in your throttle being glued tightly and you will be unable to open the throttle, thus rendering your hot grips no good. If this happens like I did then you have to unscrew the 2 screws holding your throttle together and you need to start scraping the excess glue that has run down into the housing being carefully not to damage the hot grips, once you have carefully scraped the excess glue off then your throttle should open and close as it should do. So remember to leave your bars straight or leaning to the right for the excess glue to run out. Hope that helps. Vollständige Rezension lesen
Bestätigter Kauf: Ja | Artikelzustand: Neu
Does what it says on the tin!! On the hottest setting you’d have to be high up on the alps at -40 to use it they get insanely hot, for us in the uk just perfect really, easy to install the only thing I would say is maybe use your own glue something slightly stronger and better as I used the supplied one and it come loose after a couple of weeks (maybe my fault who knows) but used some gorilla glue and it’s been fine since. I would definitely recommend these tho keeps your hands super toasty and warm with some decent gloves to boot 🤙
Bestätigter Kauf: Ja | Artikelzustand: Neu
Never used one of these before and I must admit that I absolutely love them. Installation was easy and took me just over 2 hours. Nice heat at 75%, never had to go over yet. And nice safety fuse that if case u forget to turn them off, it will do it after a couple of minutes or when voltage goes below certain value.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Excellent and simple installation. I used to have to older Sports heated grips. Although great I was constantly worrying if I turned them off or not when parked up. Well no more worrying with these new ones. The smart controller recognised when the engine is off and also monitors the battery level. In both cases if they turn off then the grips turn themselves off. I believe the instructions give you 2 minutes before stopping the heat and waiting on standby for a further 5 minutes then turn completely off. In simple terms no finding switch lives, messing about with your wiring loom etc. Just fit and play. One thing to note for first time users make sure your throttle grip snaps back to the off position quickly as this would be an MOT failure. Test the handles left to right making sure the wire doesn't catch and throttle closes quickly before applying any glue. I've used the super glue before in the past and although it does work I've found Evostick red glue is great. Gives you more time before setting allowing a finer adjustment when fitted. Although takes a good 24hrs to set. Just my personal preference. As for the Oxford product you can't go wrong and the price is great, I paid a lot more a couple of years back. Bracket with fittings provided and control unit now screws to the bracket so no pad losing its stick after 6 months. Vollständige Rezension lesen
Bestätigter Kauf: Ja | Artikelzustand: Neu
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Griffe, Abdeckungen & Pads
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Hier sparen: Griffe, Abdeckungen & Pads