Lieferung zwischen Do, 13. Jun und Sa, 15. Jun nach 43230 bei heutigem Zahlungseingang
Wir wenden ein spezielles Verfahren zur Einschätzung des Liefertermins an – in diese Schätzung fließen Faktoren wie die Entfernung des Käufers zum Artikelstandort, der gewählte Versandservice, die bisher versandten Artikel des Verkäufers und weitere ein. Insbesondere während saisonaler Spitzenzeiten können die Lieferzeiten abweichen.
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 403Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
Einige der in dieser Tabelle aufgeführten Informationen wurden bereitgestellt von skidauto
I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.
