Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Meistverkauft in Türen & Türenbleche
Aktuelle Folie {CURRENT_SLIDE} von {TOTAL_SLIDES}- Hier sparen: Türen & Türenbleche
The part is OEM and replaces the broken part effectively, you have to watch the hinge pin doesn't fall out when fitting as it's a loose fit. It's ok once in the housing of the handle. This pin needs to be loose as it is the corrosion in this area of the hinge pin that eventually causes the part to break. The overall fitting of the job takes about 45mins if you're a first timer.
Bestätigter Kauf: Ja | Artikelzustand: Neu
Replaced my daughters broken 2010 Fiat 500 door handle with this one. Fitted well and has been in regular use for a couple of years now. Good product.
Bestätigter Kauf: Ja | Artikelzustand: Neu
As anyone who’s had / has a Fiat will know little things will break and my drivers door handle was literally hanging off, so this piece of kit was perfect and affordable. Did the job and my handles like brand new :)
Bestätigter Kauf: Ja | Artikelzustand: Neu
Surprisingly easy to fit; there's a you-tube post showing how you do it.. I found that it was posible to get the broken hinge out of the door handle without removing it from the car, using a cross head screw and a 1/4" spanner.. I used a dental mirror to see what I was doing... I had taped the jiffybag which the hinge came in to protect the paintwork from being scratched by the tools! I was also able to put the new hinge in place this way too [I used some masking tape to retain the hinge pin] and found it easy to put the hinge in place, having removed the old part from the door. ##On our 500, apart from T20 [30?]screw behind the 'chrome' [haha] door handle and two behind the little bit of trim, which pops off from where you grasp the door there were NO screws holding the trim on the door, which there are on the one in the video.. So I just prised off from the bottom, removed the handle and wires as in the video, and pushed it up and it popped off! I cut away a small part of the white internal seal and used a 10mm spanner to remove the nut. All done in under a hour.. Semples.. Ideal product.Vollständige Rezension lesen
Bestätigter Kauf: Ja | Artikelzustand: Neu
Quality part, easy to fit by watching YouTube video. You don't have to buy a complete new handle, just the hinge part for about £7. If you are careful and have a Phillips, Torx or Allen "bit" you don't need to take the complete handle off to fit this part. Mine took about 30 mins, having done this first one I could do another in 20 mins easy.
Bestätigter Kauf: Ja | Artikelzustand: Neu