Info
Alle Bewertungen (81)
- kylebix5 (29234)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- upautoparts (176)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- ljbreaker (5907)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufGreat buyer all across the board! Thank you for your purchase!
- ib_auto_parts (424)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufA+++++
- entaifirst (17897)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufThanks for your purchasing in my store and best wishes!
- pinelakeparts (29130)- Bewertung vom Käufer.Letzte 6 MonateBestätigter Kauf?.•'´¯)¤(¯`'•.?.•'´¯)¤¤ THANK YOU! ¤¤(¯`'•.?.•'´¯)¤(¯`'•.?
Rezensionen (13)
31. Jan 2018
Extremely Stiff
2 von 2 finden das hilfreich Got this because I was converting my SCX10 ii into a Deadbolt. The links are pretty easy to install, but they make the suspension extremely stiff. It makes the suspension about 5 times stiffer than stock, but there's a pretty simple solution. First, tighten the hardware as tight as possible without stripping, and loosen it about 1 turn of the driver. This puts less pressure on the links. Second, before installing them, put a good amount of lube to loosen up the very stiff ball joints. If you do this, the suspension is still pretty stiff, but you can just loosen the spring preload on the shocks. Other than the small inconvenience, these links look beautiful, and are really sturdy.
24. Mär 2017
SSD Rock Shield
This bumper is really neat. It's 3d printed and yet it's still metal. This bumper gives you so much more angle compared to the stock scx10ii. Easy install. Just remove rear bumper, slide this bumper in, put blue thread locker on the screws, and you're good to go. This bumper is very low profile and will require you to trim the rear fender slightly, and if you have the RTR, there will be a slight gap between the hatch and the bumper. Overall, a great bumper and would recommend.
01. Nov 2018
Amazing
This is an essential upgrade for the LaTrax series. I just stripped my rear diff the other day after light running on pavement. These seem so much stronger, and have a much tighter gear mesh. Easy assembly, and all you need to do it take the bearings off the stock plastic differential and slide them on to the metal differential.