Info
Alle Bewertungen (176)
- toptool_us (7227)- Bewertung vom Käufer.Letzter MonatBestätigter KaufHope to deal with you again. Thank you.
- ancel-tool (19149)- Bewertung vom Käufer.Letzter MonatBestätigter KaufQuick response and fast payment. Perfect! THANKS!!
- nlassupplies (121896)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufQuick response and fast payment. Perfect! THANKS!!
- savings_mart (1789)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- primetimebuys (19076)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufThank you!
- jasonhatt_8 (281)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufThank you for your purchase, have a great day!
Rezensionen (12)
17. Nov 2023
The holes didn't line up perfectly, but I got it to work pretty well
I tried to get the upper and lower holes of the new grille lined up so I could use the original crummy, cheap plastic push clips that Honda installed 8 or 9 years ago. Between old age and whatever whacked the original grille, there was no way. I found the part number for OEM-equivalent (or better) clips (Push-type Retainer Clip Fastener Rivet 91505-TM8-003) and ordered a 30 pack from Jeffy's little company. After a fair amount of pushing, nudging, squeezing, etc., I was able to get all of the clips in the holes and locked. Kind of like a womens' corset - if one of those babies pops, at least four of them will go at the same time. I think it will be OK. Hint - use a toenail clipper and a file very carefully to flatten one flange on the push pin. That way you can push the two lower clips in from the top instead of the bottom, without removing the bumper cover. I firmly believe that every mechanical engineer should have to disassemble and reassemble every prototype vehicle before he gets paid and before it goes into production. These twits have no clue what it takes to repair their handywork.
21. Mai 2019
Saved our taste buds!
It worked perfectly! We completely forgot how awful our tap water is...
22. Sep 2023
Upper Cams Perfect - Lower Cams Wrong
The upper (door) cam worked fine. It is what I replaced. The original lower cam on my fridge was fine. However, the lower cams that came with this kit had the notches in the wrong places. The holes in both lower cams were also too small. Even when I drilled them out, the notches were in the wrong place. The upper cam lobes have to fit into the lower cam slots when the door is closed. These are offset, making them useless. Still, I really only needed on upper cam, and this kit had the correct one. So I really can't complain much because the price was no bad for that single cam that I needed. I was very lucky.