Info
Alle Bewertungen (596)
- apex-used-appliance-control-boards (8803)- Bewertung vom Käufer.Letztes JahrBestätigter KaufGreat Buyer. Fast Payment. Thanks for the order!
- goharddrive (122302)- Bewertung vom Käufer.Letztes JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- backyardpoolsuperstore (192629)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufHope to deal with you again. Thank you.
- it_xchange (3021)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufFast Payment! Great buyer!
- ro9hbxxariq@Deleted- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- sohotday-6 (1956)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
Rezensionen (14)
30. Dez 2017
Does what it should.
These are great when you have equipment with limited space behind it. It's a simple pigtail of sorts and does the job to convert to a right angle IEC plug. Less expensive than buying an IEC cable with a right angle plug. It's not very thick cable (likely 16GA) and may not be appropriate for higher wattage items, but for most things it should be fine.
23. Nov 2017
works well for audio
As long as your expectations are reasonable, this is a good oscilloscope. Be sure to organize all the components well before starting to solder anything. I taped all the resistors to a sheet of paper and labeled them after verifying their values with a multi-meter. This made it much easier to find the right part. The instructions did not specifically mention that the display has doubled sided foam tape on the back. When I realized this and used the case the align it properly, it made the rest in the assembly much easier.
The scope puts out quite a bit of noise. I haven't tried to shield it but i expect some copper tape lining the inside would help.
It is limited in functionality, but for the money, Im quite satisfied. The operating instructions are not as good as the build instructions, but there are YouTube videos that help a lot.
08. Jan 2019
Works well on Fire TV sticks v2 and 4k. It also works fine with a Raspberry Pi Zero.
Works well on Fire TV stick Gen 2 and 4k. It also works fine with a Raspberry Pi Zero. Straight forward, the fire tv recognizes it and uses it as the preferred connection with DHCP automatically, no configuration required at all. You can still go in and force the stick to use wifi if you needed to for some unlikely reason.
The Raspberry Pi Zero also sees it and uses it without any configuration required for DHCP, no doubt other Pi models would work with it as well if you needed an extra ethernet port. On the pi though, USB ports and the built in ethernet are all shared so the performance might not be that great if pushing two ethernet adapters (regardless if external or built in).