Info
Alle Bewertungen (93)
- entars (6563)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufLA RINGRAZIAMO PER ESSERSI AFFIDATO A NOI,ALLA PROSSIMA AFFAREFATTO
- storemaniaitaly (435)- Bewertung vom Käufer.Vor über einem JahrBestätigter Kauf✰✰✰✰✰ ☞ STOREMANIAITALY TI RINGRAZIA ☜ ✰✰✰✰✰ EBAYER A 5 STELLE ✰✰✰✰✰
- reglrapid_0 (145)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufMerci
- colleziomaniaitaly (1015)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufOttimo acquirente, pagamenti rapidi, grazie da COLLEZIOMANIAITALY !!!!
- sia.custom (24865)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufSeriöser Käufer, prompte Bezahlung, geschätzter Kunde, vorbehaltlos zu empfehlen
- elartcom (22326)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat customer hope to do business again ! UAB ELart engine parts
Rezensionen (3)
31. Mär 2020
Good steering, no noticeable NVH increase
Pros:
Good build quality.
Easy to fit ( you need a hydraulic press).
No noticeable noise, vibration or harshness increase.
The direction is a tad more precise/responsive.
Cons:
A bit pricey !
20. Mai 2023
Good product!
Works as expected! Witch custom firmware you can change lots of parameters like sn, ploam, id, sw_ver.
You need to build a serial interface to unlock it.
30. Jun 2017
Not that good.
Looks great at the beginning but once you start using the product you also start regretting.
The bed won't level no matter what you do and the first layers won't stick properly.
If the bed level is ok on the corners, it will almost touch the extruder in the centre. Fix that and you'll enter in an endless adjustment loop. I almost fixed this with a glass but still subpar quality.
The extruder's spring is too weak and after two prints you'll need to put a spacer under it otherwise it won't pull the filament.
The printer legs are not adjustable and mine come with a sorter one ... ( missing QA again ) so I got to put some paper under that foot.
It's built with the cheapest materials ( I repeat, the cheapest materials ).
I didn't expect it to be perfect, but to pay 300 E on something which fails almost all prints it's really disappointing.
Very very limited room for improvement, If you get a delta or prusa at least you can change the extruder or other parts.