Info
Alle Bewertungen (2.060)
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat communication. A pleasure to do business with.
- modulefans (117703)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufHope to deal with you again. Thank you.
- *****- Bewertung vom Käufer.Letztes JahrBestätigter KaufGreat communication. A pleasure to do business with.
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- packforyou (7986)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat communication. A pleasure to do business with.
- upscalelimited (2866)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Rezensionen (8)
30. Apr 2016
Worth the Price.
These cutters work great and for the price they can't be beat. If you are planning on buying a pair of Plato cutters I would recommend them highly.
02. Nov 2016
Good Deal !
The product worked fine out of the box. If you are going to buy a used PC these are the people I would get it from. It was physically like new. No scratches or dents in the cabinet. However, they do not remove old programs and files of the previous owner or update the drivers. If you purchase a pc from them I would go online and download ADVANCED SYSTEM CARE and DRIVE BOOSTER. Both are free from IOBIT. After cleaning up the old files and programs I ran DRIVE BOOSTER. It updated 23 drivers. Then I ran Advanced System Care to clean up the hard drive and their free DEGRAG program. It now runs like a new PC. This worked out fine for a piece of Laboratory equipment which had to run on Windows XP. I have sent other customers of mine to them to purchase PC's. All have worked just fine out of the box and are in really good shape. Great company to do business with.
05. Apr 2016
Please Take Note !
The item works great but there is one catch. If you are in the boost mode (switch in the UP position) and you plug in the USB cable without plugging in the external power cable, the "V IN" pin (pin 30) on the Nano Will supply about 4.25 volts to the red power pins on the shield through the buck convertor diode. I have not been able to figure out how from the schematic. If you have a motor or some other high current device connected to the red power pins on the shield it WILL RUN and may blow out the regulator on the Nano. There should be a diode on the V IN pin to allow +12 volts to feed the V in pin on the Nano but block the voltage on the V IN pin from supplying voltage to the shield when the 12 volt power is not being used. Everything works great as long as you have BOTH cables plugged in. I would recommend the shield as long as you use caution. It happened on three different Nano boards so it is not a defective Nano board.