Info
Alle Bewertungen (3.121)
- s***6 (2171)- Bewertung vom Käufer.Letztes JahrBestätigter KaufExactly as described and fast shipping! Highly recommend.
- yuuuup11 (73406)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- hpb_movies (60964)- Bewertung vom Käufer.Letzter MonatBestätigter KaufThanks for your order!
- goodwillminnesota (423740)- Bewertung vom Käufer.Letzter MonatBestätigter KaufThank you for your support of Goodwill Easter-Seals MN mission!!! Great Buyer
- thesupremestore (46)- Bewertung vom Käufer.Letzter MonatBestätigter KaufThank you for your purchase !!! Great buyer !
- *****- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
Rezensionen (22)
16. Aug 2020
GREAT *BUT* you HAVE to go into your stereo off settings to turn AUX 1 & 2 - read how to below:
1 von 1 finden das hilfreich Car Bluetooth Audio Cable Adapter Aux Receiver 12 Pins For Pioneer IP-BUS Ports
I ALMOST contacted the seller to say that it wasn't working because with all the volumes turned all the way up, I could just Barely hear a little sound from the speakers.
But then I found the setting that turned on the internal stereo amp model DEH-P3100UB:
I found the problem was 2 things.
1. My stereo has an AUX 1 and AUX 2 and the adapter is recognized as AUX 2.
2. My stereo has 2 Aux OFF settings that must be turned ON.
This setting can only be seen and accessed by:
a. turning the car power on.
b push source button till stereo power turns off.
c push dial button till clock settings display, select aux settings next.
d turn Aux 1 & 2 ON.
Hope this helps others!
20. Okt 2022
Has a light Oil in it! So this won't work for many common applications! Cheap hybrid!
This is Not 100% silicone.
It smells, acts like it has a light oil in it!
I would NEVER use this on seat belts or window felt tracks for my car.
I've had good luck with CRC brand but they were out of it and I tried this.
I'm going back to CRC, a True silicone spray.
07. Jul 2023
It might Strip your transmission shaft if you don't follow my installation recommendation!
The OEM motor coupler doesn't have the metal inserts which was good for my mid 90's Super Capacity Washer because this stopped the nylon from cracking/breaking.
BUT the metal insert hole doesn't fit on as snug and SO it eventually stripped/rounded my transmission's input shaft.
Causing me to have to force a sheet metal screw in between which kept slipping. Eventually I had to weld the inside shaft to the metal insert..
SO if you use these with the metal insert, if it goes on loose on either your motor or transmission shafts, then, I STRONGLY recommend you simply:
Coat the shaft with some super glue then sprinkle with baking soda.
THEN when you install the coupler, its metal insert should fit the shaft tightly now, you should be safe to use it now.
These old washers were great units, I'm keeping mine going for now, everyone in the house loves it's a work horse.
Take care