Info
Alle Bewertungen (38)
- the-wolf-man (78606)- Bewertung vom Käufer.Letztes JahrBestätigter KaufThank you for shopping with The Wolfman Store!
- bmw_direct (113136)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufThanks for your custom, fast payment, good comms, valued customer.
- VCpjD1GyT1m@Deleted- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat product at great price
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- veteronusmodels (31654)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufThank you for shopping with Veteranus Model Kits. Latest kits at great prices.
- trinitymews2 (89744)- Bewertung vom Käufer.Vor über einem JahrBestätigter Kauf‹(◕‿◕)›▀▄█▓▒░ TOP LEVEL! ░▒▓█▀▄‹(◕‿◕)›▓▒░
Rezensionen (3)
27. Sep 2023
It’s genuine so good, but expensive
Typical good quality boot liner for my i4. Well made, heavy duty materials that anyone with a BMW comes to expect. Due to having a special deal at the time, the price was well under the usual Dealer cost so made it better value, however it’s still expensive.
Worth buying though.
09. Nov 2022
Good quality, well made, easy to use.
I bought this as an additional camera having used Nextbase for a while. No vacuum mount, only a stick on version which is fine as vacuum mounts tend to detach in an accident! You must clean the screen with alcohol (Isopropyl is best) beforehand. The camera is held by a very strong magnet, so easy to remove and get it back in the right spot.
Image quality is very good, although as with every other camera I’ve had over the years, night quality is less sharp - but still very good.
The software updated as soon as I connected the device to a mobile phone and no issues with it holding a connection as long as the two devices are within about 6ft/2m of each other.
You do need to charge the device via a USB power supply for 2 hours before installing in a car, and setting up should be done whilst externally powered. I would highly recommend obtaining the Nextbase external power cabling for a car or you’ll have the 12V cigar plug/lead dangling about in front. Don’t place the camera within the swept area directly in front of the driver, you might get an MOT failure!
21. Jul 2021
Impressive, but slightly flawed.
2 von 2 finden das hilfreich Cast aluminium replacement chassis for the Tamiya 1/16 Leopard A2 kit #56020. Beautifully cast and dimensionally accurate. Came with a small number of M3 screws to hold the torsion bar springs in place but not for the others, for those you will need to obtain a set of M3 machine screws to replace those supplied by Tamiya. At this price point all the screws should be included as a foc issue given none of those that come with the kit are suitable
The big issue - and this causes the star loss - is that the forward end of the chassis should be canted in slightly (about 2°) and isn’t. This causes the two track idler wheels to be out of alignment and in turn causes stress and excess wear on the two wheels. The fix unfortunately means significant work fitting a separately available (but not from this supplier) adjuster kit and some drilling. Nine if the aftermarket metal replacements for the tensioner expect anything other than the correct chassis profile.
There have been reports of poor threading, but in my case each thread is clean and screws run correctly with no binding. I did however carefully wash my chassis to get rid of any swarf or release agent residue, and then used compressed air to ‘blow’ the threads clear.
This is the chassis that Tamiya should have supplied with the original kit.