Info
Alle Bewertungen (231)
- jianyuedianzi (2209)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGood buyer, prompt payment, valued customer, highly recommended.
- urmarketoutlet (81576)- Bewertung vom Käufer.Letzter MonatBestätigter KaufA+ Gold Customer. Fast Pay Good Communication easy to work & quick response
- dailydeals-business (11912)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- ethar-7040 (31)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufNice, great condition
- longhorntrading247 (2214)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- re-retailer (42367)- Bewertung vom Käufer.Letzte 6 MonateBestätigter KaufGreat Easy to work with Buyer. Fast Payment
Rezensionen (6)
31. Jul 2018
Functional replacement
The coils work fine. Their resistance is a bit off compared to the OEM coils/spec in the service manual, but the dryer doesn't seem to care. Unfortunately this wasn't my issue but the coils open fine.
20. Feb 2017
OEM part, but difficult to align
1 von 1 finden das hilfreich Installing of this gasket requires you to apply silicone sealant to the mating surface of the gasket and install it around the perimeter of the glass. That is the easy part. The gasket is built with a little bit of slop in it for expansion I am assuming, so if you pull it tight as you install it, you will be left with excess that will lift off the glass. The second and biggest issue is the angle at which the gasket cures on the glass is CRITICAL. The first time I installed it I assumed the gasket would cure at the proper angle and lay flush on the roof like the original gasket did. Unfortunately the corners install at an upward angle as you press the gasket onto the glass and I didn't notice this until you set it back on the car. I carefully took a razor around the gasket to remove it from the glass. Started the entire process over again and used masking tape to hold the gasket at a slightly downward angle so it would be flush on the roof. I was about 90% successful. One of the corners is still lifted and I have a weight pressing down on it while it is installed in the roof hoping it will sit flush. I was thinking of installing the glass in the roof immediately after applying the sealant, but the gasket is so loose I am afraid it would lift off the glass and not set properly. I really want to know how Nissan installed them.
02. Jun 2020
Great replacement cover for Weber Q120
Fits Weber Q120 perfectly. Hangs at the same height as the previous design (thicker) cover. Material is the same as my patio furniture covers which are very old and still in good shape.