Info
Alle Bewertungen (1.153)
- *****- Bewertung vom Käufer.Letztes JahrBestätigter KaufGreat item and great seller cheers fella.
- *****- Bewertung vom Käufer.Letztes JahrBestätigter Kaufcommunicated
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufQuick delivery well packaged, item came as described thanks 😊👍👍👍
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufFast delivery, great seller. A****** great communication
- pdcraftworld (72860)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufPrompt Payer, Good Ebayer 5* - thank you for purchase
- *****- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufWhat a joke ordered item 7 October never come message seller no hope did not even give a s.. T. Did even what to help stay a way from this scam seller
Rezensionen (9)
07. Jan 2018
Small zip lock bags.
Extremely thin, money better spent elsewhere, they really are dreadful suspect a few microns thick, pretty much like mylar. However they do seal good but don't count on this bag to protect anything.
10. Jun 2019
Ford fiesta injector seal kit.
Good kit however copper washers loose outer diameter perfect, inner diameter quite loose around injector tip. The injector plastic sleeves/rattle bushes were excessively tight and all of them had to be filed around the bottom edge, before being tapped into cylinder head with a socket and small hammer. The o-rings are of good quality but I didn't need to use them. Overall kit is good but tolerances are out compared to others I've used. The copper seals did work though but I ensured the seating surfaces were reamed flat and square prior to fitting injectors. Recommend this kit on price only.
13. Jul 2017
TDA7492P Bluetooth amplified module.
1 von 1 finden das hilfreich Excellent quality pcb and components. The surface mount components are soldered well and cleanly. Component alignment gets 9/10.
I have ran the module on 18v for 3 hours straight with no over heating issues, although the inductors/chokes and the main amp IC was slightly warm in an open environment at 19deg ambient air temp.
Component temperatures are likely to be slightly higher if the board is housed in an enclosure, which i plan to do so.
There is some slight clipping and sound distortion at the near maximum volume level.
It does recommend using 8ohm speakers, however i used 4ohm as thats what i had, but sound quality is very nice and bassy when speakers are enclosed i was driving 2x4inch 50W speakers in a ported box.
I have desoldered all switches and have made a custom panel switch board which i will fly lead solder to board, planning to make a bluetooth battery operated sound/boom box.
Hope this info helps.