Bewertungen und Rezensionen

Mehr erfahren

4.9

23 Produktbewertungen

22 Nutzer haben dieses Produkt mit 5 von 5 Sternen bewertet
0 Nutzer haben dieses Produkt mit 4 von 5 Sternen bewertet
0 Nutzer haben dieses Produkt mit 3 von 5 Sternen bewertet
1 Nutzer haben dieses Produkt mit 2 von 5 Sternen bewertet
0 Nutzer haben dieses Produkt mit 1 von 5 Sternen bewertet

Would recommend

Good value

Good quality

Relevanteste Rezensionen

Alle 21 Rezensionen sehen

von woodworkingskipper
18. Sep. 2018
Great Product, go for it!
I have used Lee molds for many years, since the early 70's I have used a number of other brands as well. Lee make very good molds which work very well and will last a very long time if properly maintained and not abused. This particular pattern has been a favorite of mine for many years as well. It performs better than a minie ball and better than a round ball.
Bestätigter Kauf: JaArtikelzustand: Neu
von bramlett_jeff
11. Feb. 2023
My rifle likes these bullets!
My Traditions Kentucky flintlock rifle with a 1:66 twist preferred these bullets over the longer REAL bullet that is 320 grains. I was hitting a paper plate at 50 yards offhand with these over 60 grains FFFg. I read on a forum that they are even more accurate if you put a wonder wad between the powder and bullet, so I am going to try that. Also I am going to try different powder charges. One thing I noticed is that these were not seating as easily as the longer ones in the tip of the barrel. The longer ones are narrow at the base allowing for easy loading alignment. I coned my barrel a small amount so that these 250 grain ones will easily set in the barrel. I have not shot them yet with the coned barrel. Another thing is that is took considerable effort to load these in the first few inches of the rifle, but once started, they went down easily. If your rifle is a faster twist it might like the longer REAL bullets. I suggest getting both molds to see which one your rifle prefers.
Bestätigter Kauf: JaArtikelzustand: Neu
von wjpantano
29. Sep. 2022
Works great!
I have had very good luck and results with the Lee brand loading blocks. These were also great working molds. They warm fast, and provide excellent forming once the proper temp of the lead is achieved.
Bestätigter Kauf: JaArtikelzustand: Neu
von charlewhorto-2
06. Dez. 2021
Very pleased with the mold.
Prior to use, I cleaned it thoroughly with denatured alcohol. I’ve been smoked the bullet cavities with soot from a wooden match. From the start, bullets dropped out flawlessly. The box states that it drops a 250 grain bullet. That it does. However, the picture on the end of the box shows a bullet heavier than the 250 grain bullet. I am very happy with the product and the bullets shoot very well in my Traditions Deer Hunter.
Bestätigter Kauf: JaArtikelzustand: Neu
von boken.ke.u7uvotuwen
06. Jan. 2025
Good choice in bullet molds
Lee has a good reputation and future use of this mold
Bestätigter Kauf: JaArtikelzustand: Neu
von 0203bravo6
28. Apr. 2022
Casting moulds
Lee moulds as excellent and with one, you don't need to depend on any store 9r website for your shot!!! Just cast your own and as many as you want!!!!
Bestätigter Kauf: JaArtikelzustand: Gebraucht
von patrick20-7
06. Mai. 2020
Lee Bullet Mold
This mold is precise! You can make bullets super fast.. saves alot of money and alot of fun to make!! They seat it the muzzleloader quite nicely and shoot very well!! Highly recommend!!
Bestätigter Kauf: JaArtikelzustand: Neu
von hunt3006jeeps
20. Feb. 2023
You should do it.
Glad I gave the lee REAL mold a try. One hole groups at 50 yards in a Hawken 48 twist.
Bestätigter Kauf: JaArtikelzustand: Neu
von stwibst-uavmmx3l
22. Mai. 2019
50 cal Lee mold
easy to use,very good bullets
Bestätigter Kauf: JaArtikelzustand: Neu
von mabuc_65
16. Mär. 2020
Good product
This mold once hot will crank out get bullets . And it's just fun to make them
Bestätigter Kauf: JaArtikelzustand: Neu