MOMENTAN AUSVERKAUFT

Acoustic Bone Saddle Fits Many Martin Guitars Wave Compensation 11 Mm Height

Über dieses Produkt

Product Identifiers

BrandMartin
GTIN0727908049961
UPC0727908049961
eBay Product ID (ePID)1627429021

Product Key Features

ColorWhite
MaterialBone
To FitBass Guitar, Acoustic Guitar
TypeSaddle

Dimensions

Weight0.08 lbs

Bewertungen und Rezensionen

5.0
19 Produktbewertungen
  • 18 Nutzer haben dieses Produkt mit 5 von 5 Sternen bewertet
  • 1 Nutzer haben dieses Produkt mit 4 von 5 Sternen bewertet
  • 0 Nutzer haben dieses Produkt mit 3 von 5 Sternen bewertet
  • 0 Nutzer haben dieses Produkt mit 2 von 5 Sternen bewertet
  • 0 Nutzer haben dieses Produkt mit 1 von 5 Sternen bewertet

Would recommend

Good value

Enjoyable

Relevanteste Rezensionen

  • Perfect fit for Martin 000-15m

    I had an Anthem SL put in a Martin 000-15m. The guy who installed it did not shave the bridge enough to compensate for the pickup thickness. I sanded it and lowered the action......then I got greedy and tried to lower it some more without getting fret buzz. Went too much and got buzz. So I bought this saddle and got it perfect. It fit perfect and was easy to sand. The compensation looked just like my factory bridge. If you have a Martin w this drop in style saddle, it’s really easy to lower your action yourself.....and cheap enough to buy 2 and see how low you can get it without buzz with the first one and then use the 2nd one to get action perfect

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Quality Saddle, Right Price!

    This is a quality bone saddle at a very reasonable price. There was plenty of height so I could adjust for perfect action. Thickness and width took very minimal adjustment for a nice snug fit into the bridge slot. I've used other bone saddles that are almost twice the cost but, in my opinion, the quality of this saddle is just as good. I put this in my 2010 Martin Custom 000-15M and the intonation was dead on. Looks like I've found a new resource for upgrading my guitars.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • MacNichol Saddle - Great for Martin DC16

    Great fit and quality. Aligned with top of the original saddle and drew a line with a fine pencil. Then just worked it down to that line plus a little because I wanted to go just slightly lower than the original. Height and intonation are great now. Plus the tone and sustain seemed at least slightly improved. Also, I replaced plastic bridge pins with ebony.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Well worth the price

    This bone bridge saddle came with the intonation contours that match my Martin HD-28's original Tusq bridge saddle. It required a bit of sanding to fit the slot, and for the string height I prefer, but the sound improvement compared to the original Tusq bridge saddle is immense. The guitar now has much better bass response and clearer overtones; almost a different instrument.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Excellent fit and quality.

    Give this thing the "drop test" and you'll hear the difference between it and any composite material. This was a terrific replacement to the TUSQ saddle that came in my Martin Custom MMV. Good snug fit, just had to sand down to the desired height for the action. Really brings out the rich response of the Rosewood.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Fit Perfectly

    This saddle only needed to be sanded down to adjust my personal action height preference. The width and length were perfect. The original bridge was too loose. Guitar sounds great.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Great Product at a Fair Price

    Nothing much to report on other than this is an accurately compensated reproduction drop-in saddle for later-model Martin guitars. This one, however, is made of BONE rather than a man-made synthetic material. When I swapped out my old saddle for this bone replacement, the tone improvement was, although not dramatic, noticeable and in a good way. All I needed to do before installing was sand down the saddle to match the original's height (sandpaper was included, too!) and drop it in. The length and thickness dimensions were perfect and no trimming was required in that respect. So again, this is a great product and at a fair price. Oh, and shipping was fast, too! Recommended.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Easy to install.

    It was easy to fit to my guitar. I believe the top edge could be finished slightly better.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Best Bone Saddle for Martin Guitars!

    Installed these bone saddles in my Martin HD-28 and MMV, and they fit like a glove. Excellent quality and great value!

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Perfect

    Easy to sand. Doesn't take too long to do just trace whats left of your old one on it sand it and fit it in no problem

    Bestätigter Kauf: JaArtikelzustand: Neu