Dayton 6Y945 Band-/Tellerschleifer, 1/3 PS, 120 V 6Y945-

Grainger

(124576)

Mehr Artikel des Verkäufers

Verkäufer kontaktieren

US $370,60

Ca.EUR 318,91

Artikelzustand:

Neu

Stückzahl:

Mehr als 10 verfügbar2 verkauft

In guter Gesellschaft. 23 Leute beobachten das.

Ganz entspannt. Kostenloser Versand & Rückversand.

Versand:

Kostenlos UPS Ground.

Standort: Lake Forest, IL, USA

Lieferung:

Lieferung zwischen Mi, 19. Nov und Fr, 21. Nov nach 94104 bei heutigem Zahlungseingang

Rücknahme:

30 Tage Rückgabe. Kostenloser Rückversand.

Zahlungen:

Sicher einkaufen

eBay-Käuferschutz

Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

Gratis Rückversand im Inland
Punkte für jeden Kauf und Verkauf
Exklusive Plus-Deals

Mehr erfahren- eBay Plus - wird in neuem Fenster oder Tab geöffnet

Info zum Artikel

Der Verkäufer ist für dieses Angebot verantwortlich.

eBay-Artikelnr.:355731262671

Zuletzt aktualisiert am 22. Sep. 2025 15:52:40 MESZAlle Änderungen ansehenAlle Änderungen ansehen

Artikelmerkmale

Artikelzustand: Neu: Neuer, unbenutzter und unbeschädigter Artikel in nicht geöffneter Originalverpackung (soweit ... Neu: Neuer, unbenutzter und unbeschädigter Artikel in nicht geöffneter Originalverpackung (soweit eine Verpackung vorhanden ist). Die Verpackung sollte der im Einzelhandel entsprechen. Ausnahme: Der Artikel war ursprünglich in einer Nichteinzelhandelsverpackung verpackt, z. B. unbedruckter Karton oder Plastikhülle. Weitere Einzelheiten im Angebot des Verkäufers. Alle Zustandsdefinitionen aufrufenwird in neuem Fenster oder Tab geöffnet

UPC: 0190735373736

Über dieses Produkt

Product Information

This Dayton Belt and Disc Sander features a 1/3 horsepower motor that's powered by a 120V power source through the attached power cord. The belt table tilts from 0 to 90 degrees, and the disc sander reaches speeds of 3,500 RPM. The disc diameter is 6 inches, and the disc table size is 5.5 inches by 8.25 inches. It features a 1.5-inch dust collection port.

Product Identifiers

Brand

Dayton

MPN

6Y945

GTIN

0190735373736

UPC

0190735373736

eBay Product ID (ePID)

15010154899

Product Key Features

Power Source

Corded Electric

Color

Multicolor

Voltage

120 V

Type

Belt Sander

Disc Diameter

6 in

Model

unisex

Power

1400 W

Dimensions

Item Height

14 1/2

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

Ich versichere, dass alle meine Verkaufsaktivitäten in Übereinstimmung mit allen geltenden Gesetzen und Vorschriften der EU erfolgen.

Info zu diesem Verkäufer

Mitglied seit Feb 2016

Antwortet meist innerhalb 24 Stunden

Angemeldet als gewerblicher Verkäufer

Shop besuchen Kontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten

Genaue Beschreibung

5.0

Angemessene Versandkosten

4.9

Lieferzeit

5.0

Kommunikation

5.0

Verkäuferbewertungen (143.222)

Dieser Artikel (1)

Alle Artikel (143.222)

v***t (4357)- Bewertung vom Käufer.
Letzte 6 Monate
Bestätigter Kauf
Seller was great but unfortunately I wont be ordering again due to FedEx being used. Item just as described. Amazing fast shipping. Great Price. Once again some of the boxes were RUINED BY FEDEX. FedEx literally tossed this item in the middle of our road with the oil and mud and it was run over yet Fedex marked it delivered and went on the merry way. Apparently FedEx thinks its ok to toss packages in the middle of the road and mark it delivered.
GRAINGER APPROVED 11A689 PK 25 Shipping Box,12x12x12 in 11A689 (Nr. 317030293761)
r***f (272)- Bewertung vom Käufer.
Letzter Monat
Bestätigter Kauf
I purchased another stack of 15 boxes for my business from Grainger and they had sent them via FedEx. What I received was a section of cardboard with my packing slip that showed my purchase, but no boxes. I called FedEx to investigate and their communication was poor and little help. I messaged Grainger and they responded within 5 minutes indicating they will reship another stack of 15 boxes and I'd received them next day. I was thankful and pleased with Grainger's excellent customer service!
GRAINGER APPROVED 11A624 PK 15 Shipping Box,22x22x8 in 11A624 (Nr. 355731782204)
s***o (173)- Bewertung vom Käufer.
Letzte 6 Monate
Bestätigter Kauf
Absolutely thrilled with purchase which was Great Quality & described. The sellers communication was outstanding—prompt, clear, and friendly. The item condition exceeded expectations in good value & appearance was even better than described. Packaging was meticulous, ensuring everything arrived safely. Shipping was fast and ahead of schedule. I’m genuinely impressed by the seller’s dedication and professionalism. This has been a wonderful buying experience, and I highly recommend this seller.
GRAINGER APPROVED 11R210 PK 25 Shipping Box,12x9x4 in 11R210 (Nr. 356060753267)

Alle Bewertungen ansehen

Produktbewertungen & Rezensionen

Mehr erfahren

4.4

36 Produktbewertungen

21 Nutzer bewerten dieses Produkt mit 5 von 5 Sternen
11 Nutzer bewerten dieses Produkt mit 4 von 5 Sternen
3 Nutzer bewerten dieses Produkt mit 3 von 5 Sternen
0 Nutzer bewerten dieses Produkt mit 2 von 5 Sternen
1 Nutzer bewerten dieses Produkt mit 1 von 5 Sternen

Powerful

Comfortable handles

Well balanced

Relevanteste Rezensionen

Alle 33 Rezensionen ansehen

von lgarfiel
19. Jun. 2018
Great value, with some caveats.
The belt is very stable and steady. For my knife making use it's saved me dozens of hours in just one weekend! It's even better than the higher end sanding belt at the forge I go to, for everything except heavy duty stock removal. Very good for shaping. There's 2 caveats: 1) Replacing the belt or the disk sander requires a screwdriver to remove all the safety plates. Fortunately they're not really necessary (at least not the ones on the belt, I haven't tried the disk yet), so if you leave them off it doesn't hurt anything. That said, the large plate in front of the belt sander does get in the way. There's a smaller one that isn't shown in the picture that also works and doesn't get in the way. 2) The platen is a bit oversized and has rounded edges. That's fine for flat surfaces ... The belt is very stable and steady. For my knife making use it's saved me dozens of hours in just one weekend! It's even better than the higher end sanding belt at the forge I go to, for everything except heavy duty stock removal. Very good for shaping. There's 2 caveats: 1) Replacing the belt or the disk sander requires a screwdriver to remove all the safety plates. Fortunately they're not really necessary (at least not the ones on the belt, I haven't tried the disk yet), so if you leave them off it doesn't hurt anything. That said, the large plate in front of the belt sander does get in the way. There's a smaller one that isn't shown in the picture that also works and doesn't get in the way. 2) The platen is a bit oversized and has rounded edges. That's fine for flat surfaces but if you want to work on a corner or plunge that's a no-go. I've been told by several people that you can simply epoxy a metal plate to the platen to get nice right angles out of it and it works fine. I haven't tried yet but it's on my todo list. It is a bit loud, and of course throws dust all over, but that's what you'd expect from a belt sander. Overall, very happy with this purchase (with the caveats above). I expect to use it quite a lot.
Bestätigter Kauf: JaZustand: NeuVerkauft von: grainger
von storm98720012012
31. Aug. 2017
Great for knife making on a budget.
Price point for anything that fits 2" belts can't be beat as far as I have seen. It's not super powerful, but it gets the job done. I have one I've been using for 1 1/2 years and it's still going strong. Just got this new one today to use in another area. Nothing appears to have changed except the color of the body. New one was white and I don't care. My reason for not giving this item a 5 star review is the factory platen. I've had to add my own on top of the factory platen on both with a 2" piece of 1/4" steel so I can grind in the plunge lines because the factory platen is about 3 inches wide. If you won't be using it for knife making, this probably won't be an issue for you.Price point for anything that fits 2" belts can't be beat as far as I have seen. It's not super powerful, but it gets the job done. I have one I've been using for 1 1/2 years and it's still going strong. Just got this new one today to use in another area. Nothing appears to have changed except the color of the body. New one was white and I don't care. My reason for not giving this item a 5 star review is the factory platen. I've had to add my own on top of the factory platen on both with a 2" piece of 1/4" steel so I can grind in the plunge lines because the factory platen is about 3 inches wide. If you won't be using it for knife making, this probably won't be an issue for you.
Bestätigter Kauf: JaZustand: NeuVerkauft von: grainger
von bignick73
28. Aug. 2018
Works great.
Purchased for knives. Like it so far, it's no 2x72 but I knew that going in, still far better than I expected. Tracks well and haven't had any issues with it bogging down. Added glass to the platen so never used the stock one bare. Will have to mod the guard to get the really low grit belts in there. It'll do a 60 grit barely, had to turn it by hand some to grind out the guard, a 36 grit ceramic won't fit without cutting the guard off around the drive wheel.Purchased for knives. Like it so far, it's no 2x72 but I knew that going in, still far better than I expected. Tracks well and haven't had any issues with it bogging down. Added glass to the platen so never used the stock one bare. Will have to mod the guard to get the really low grit belts in there. It'll do a 60 grit barely, had to turn it by hand some to grind out the guard, a 36 grit ceramic won't fit without cutting the guard off around the drive wheel.
Bestätigter Kauf: JaZustand: NeuVerkauft von: grainger
von gcUkGvdGRQi@Deleted
31. Mai. 2018
Good so far
I've used this sander for a few hours so far. It tracks nicely and has sufficient power. Two "downs": 1) no port for vacuum for the belt (there is one for the disc. 2) the table has to be removed to change the belt. Overall so far it seems to be good for the money. I hope I can say that years from now.
Bestätigter Kauf: JaZustand: NeuVerkauft von: grainger
von bilkueh
28. Nov. 2018
2x42 belt grinder
I gave it a 4 star because I had to modify the tool rest table and the platen so I could do plunge grinds on the knives I make. But I knew I would have to do that before I bought it. Other than that, it is a great little machine for the hobby knife maker like me. I highly recommend it.
Bestätigter Kauf: JaZustand: NeuVerkauft von: grainger

Dayton 6Y945 Band-/Tellerschleifer, 1/3 PS, 120 V 6Y945-

Sicher einkaufen

Artikelmerkmale

Über dieses Produkt

Product Information

Product Identifiers

Product Key Features

Dimensions

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

Info zu diesem Verkäufer

Grainger

99,7% positive Bewertungen•1,0 Mio. Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (143.222)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Great value, with some caveats.

Great for knife making on a budget.

Works great.

Good so far

2x42 belt grinder

Noch mehr entdecken:

Grainger

99,7% positive Bewertungen•1,0 Mio. Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (143.222)

Bild 1 von 1

Dayton 6Y945 Band-/Tellerschleifer, 1/3 PS, 120 V 6Y945-

Sicher einkaufen

Artikelmerkmale

Über dieses Produkt

Product Information

Product Identifiers

Product Key Features

Dimensions

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

Info zu diesem Verkäufer

Grainger

99,7% positive Bewertungen•1,0 Mio. Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (143.222)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Great value, with some caveats.

Great for knife making on a budget.

Works great.

Good so far

2x42 belt grinder

Noch mehr entdecken:

Ähnliche Suchen