Honeywell ST9400C 7-Tage elektronischer Programmierer mit 2-Kanal-

timeclocks43

(61)

Mehr Artikel des Verkäufers

Verkäufer kontaktieren

£35,00

Ca.EUR 40,47

Artikelzustand:

Gebraucht

Versand:

Ggf. kein Versand nach USA. Lesen Sie die Artikelbeschreibung oder kontaktieren Sie den Verkäufer, um Informationen zu Versandoptionen zu erhalten.

Standort: Wakefield, Vereinigtes Königreich

Lieferung:

Weitere Infos zur Lieferzeit in der Artikelbeschreibung

Rücknahme:

Keine Rücknahme.

Zahlungen:

Sicher einkaufen

eBay-Käuferschutz

Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

Gratis Rückversand im Inland
Punkte für jeden Kauf und Verkauf
Exklusive Plus-Deals

Mehr erfahren- eBay Plus - wird in neuem Fenster oder Tab geöffnet

Der Verkäufer ist für dieses Angebot verantwortlich.

eBay-Artikelnr.:286822039591

Artikelmerkmale

Artikelzustand: Gebraucht: Artikel wurde bereits benutzt. Ein Artikel mit Abnutzungsspuren, aber in gutem Zustand ... Gebraucht: Artikel wurde bereits benutzt. Ein Artikel mit Abnutzungsspuren, aber in gutem Zustand und vollkommen funktionsfähig. Bei dem Artikel handelt es sich unter Umständen um ein Vorführmodell oder um einen Artikel, der an den Verkäufer nach Gebrauch zurückgegeben wurde. Weitere Einzelheiten, z. B. genaue Beschreibung etwaiger Fehler oder Mängel im Angebot des Verkäufers. Alle Zustandsdefinitionen aufrufenwird in neuem Fenster oder Tab geöffnet

EAN: 0772040469917

Über dieses Produkt

Product Identifiers

Brand

Honeywell

MPN

ST9400C, ST9400C1000

EAN

0772040469917, 2075521328412

GTIN

2075521328412

eBay Product ID (ePID)

7029961536

Product Key Features

Power Source

2 Chanel

Colour

White

Thermostat Programmable Days

7- Day

Additional Product Features

Power (W)

Less than 1000W

Control

Electronic

Featured Refinements

Honeywell St9400c

Type

Thermostats

Artikelbeschreibung des Verkäufers

Info zu diesem Verkäufer

Mitglied seit Apr 2022

Antwortet meist innerhalb 12 Stunden

Angemeldet als privater VerkäuferDaher finden verbraucherschützende Vorschriften, die sich aus dem EU-Verbraucherrecht ergeben, keine Anwendung. Der eBay-Käuferschutz gilt dennoch für die meisten Käufe. Mehr erfahrenMehr erfahren

Mehr Artikel des Verkäufers Kontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten

Genaue Beschreibung

4.8

Angemessene Versandkosten

4.8

Lieferzeit

4.9

Kommunikation

5.0

Verkäuferbewertungen (63)

s***s (54)- Bewertung vom Käufer.
Letztes Jahr
Bestätigter Kauf
Excellent seller, quick responses, package arrived very quickly Controller was as described Thank you
Single Heater Digital Controller MC200 Single Heater DigiMC200 Powrmatic (Nr. 286292266166)
r***u (128)- Bewertung vom Käufer.
Letztes Jahr
Bestätigter Kauf
As described by the seller, the product was brand new. The seller had packaged it very well - I'm envious because I can never seem to package things so neatly! Not the seller's fault, the accompanying instructions, and even the maker's website, lack information that can sometimes be essential, such as how to pair the thermostat with the reciever. Luckily, someone has made a video on YouTube.
Honeywell T3R Wireless 7 Day Programmable Room Thermostat. Brand New (Nr. 286058856246)
o***i (127)- Bewertung vom Käufer.
Letztes Jahr
Bestätigter Kauf
Great seller, item delivered within timeframe stated and in perfect condition thanks! A*
Honeywell ST9400S ST9400S1001 1 Day DigitalProgrammer, 2Channel Service reminder (Nr. 286061698514)

Alle Bewertungen ansehen

Produktbewertungen & Rezensionen

Mehr erfahren

4.8

322 Produktbewertungen

276 Nutzer bewerten dieses Produkt mit 5 von 5 Sternen
32 Nutzer bewerten dieses Produkt mit 4 von 5 Sternen
7 Nutzer bewerten dieses Produkt mit 3 von 5 Sternen
1 Nutzer bewerten dieses Produkt mit 2 von 5 Sternen
6 Nutzer bewerten dieses Produkt mit 1 von 5 Sternen

Would recommend

Good value

Good quality

Relevanteste Rezensionen

Alle 264 Rezensionen ansehen

von millmaag
17. Jan. 2018
Great features, easy to install
I bought this to replace a Honeywell ST7100, that had failed after 20+ years of reliable service. I had to wire in a new backplate - but the new unit only needs four connections - mains live, mains neutral, a wire out to hot water and a wire out to central heating. No earth needed as it is double insulated. Not much more complicated than wiring a mains plug. The backplate is industry standard so, if this timer ever fails, I should be able to take it off the backplate and plug in any available timer, just like swapping a broken light bulb. Given that there are reports of the unit failing, I did consider getting a spare one - but they use a non replaceable back up battery that gradually runs down in storage, so decided to wait and see what happens and to get a brand new replacement if and ... I bought this to replace a Honeywell ST7100, that had failed after 20+ years of reliable service. I had to wire in a new backplate - but the new unit only needs four connections - mains live, mains neutral, a wire out to hot water and a wire out to central heating. No earth needed as it is double insulated. Not much more complicated than wiring a mains plug. The backplate is industry standard so, if this timer ever fails, I should be able to take it off the backplate and plug in any available timer, just like swapping a broken light bulb. Given that there are reports of the unit failing, I did consider getting a spare one - but they use a non replaceable back up battery that gradually runs down in storage, so decided to wait and see what happens and to get a brand new replacement if and when needed.
Bestätigter Kauf: JaZustand: NeuVerkauft von: discount.heating
von Cg6sXXElRAu@Deleted
13. Dez. 2016
Excellent Controller and ideal retrofit for 6400 series.
I bought this to replace an existing ST 6400 controiller that had a failed back up battery. Replacement took only a matter of minutes and required no skills, special tools or rewiring. This is because Honeywell have made the 9400 fit the older 6400 backplate. You leave the backplate in place. You undo two captive screws at the base of the old unit. You hinge up the old unit (it is held on two tabs at the top) and lift it off. You fit the new unit over the tabs, hinge it down ands push into place and then tighten up the two screws. Connecting pins on the rear make contact with the connectors on the backplate. That's all. It now works. All that is required is to set the time and the programmes. It is similar to the old 6400 but has a much clearer display and this is backlit (you can set ... I bought this to replace an existing ST 6400 controiller that had a failed back up battery. Replacement took only a matter of minutes and required no skills, special tools or rewiring. This is because Honeywell have made the 9400 fit the older 6400 backplate. You leave the backplate in place. You undo two captive screws at the base of the old unit. You hinge up the old unit (it is held on two tabs at the top) and lift it off. You fit the new unit over the tabs, hinge it down ands push into place and then tighten up the two screws. Connecting pins on the rear make contact with the connectors on the backplate. That's all. It now works. All that is required is to set the time and the programmes. It is similar to the old 6400 but has a much clearer display and this is backlit (you can set it to be backlit or not). This is an excellent feature. It allows me to see the controller screen without needin a torch. The programmer can be set to separately control the central heating and hot water circuits. You can set multiple timed on/off periods for each day. Mine is set to 3 on/offs per day, but you can set the unit to operate differently if yoiu wish (in the master set up). You can set the unit to be on a 1 week programe, where every day is the sam, or a 5/2 programme where weekdays and weekends are different or 7 individual days where each day can be different (a "copy" function makes this easy.. (This weekly, 5/2/ or daily option is in the master set up). Buttons to allow an extra hour or override for the Heating and Hot Water are on the front. They are on opposite sides of the display, so you cannot accidentaly press the wrong one and they light up when activated. The old controller had a slider for OFF/AUTO/ONCE/CONTINUOUS for heating and hot water. You had to open the cover to get to it. This one has a pair of push buttons and the display shows which one you have selected. The original 6400C was a very good controller. This one is an imrpovement with the same functionality but extra features that are useful. For me, the bigger display and back illumination are the two best imnprovements. It came with a new backplate. If the electricity goes off (and it has) in a power cut, it has a back up battery and does not lose the time or the programme, so no work is needed. HINT: if you are replacing an old controller, make sure that the two captive screws on the bottom of the existing back plate are fully undone. They are captive and cannot fall out. If you do not unscrew them enough they might stop the new controller slotting into place. If this happens then they need to be slackened off a bit more. Great product from Honeywell that has stood the test of time and is now improved. You can download all the information beforte you buy from the Honeywell website, but the information in the box is excellent. Oh!, and it looks nice too!
Bestätigter Kauf: JaZustand: NeuVerkauft von: heatright15
von mdea4561
29. Nov. 2017
st9400c
I purchased the st9400c to replace a now defuct st6300a . had to remove and replace the backplate as the backplate of the st6300 is not compatible with the st9400 programmer, which came with its own backplate and was quite simple to do.with these programmers you always get a selection of pics of wiring diagrams and you just have to make sure the wiring arrangement and type of system you have is compatible eg 's'plan, 'y' plan etc. I have also replaced a st6400 with the same programmer.I purchased the st9400c to replace a now defuct st6300a . had to remove and replace the backplate as the backplate of the st6300 is not compatible with the st9400 programmer, which came with its own backplate and was quite simple to do.with these programmers you always get a selection of pics of wiring diagrams and you just have to make sure the wiring arrangement and type of system you have is compatible eg 's'plan, 'y' plan etc. I have also replaced a st6400 with the same programmer.
Bestätigter Kauf: JaZustand: NeuVerkauft von: ukbargainshop1
von jagxtype2013
04. Apr. 2020
Does what is required of it.
It replaced a somewhat old Honeywell Programmer, which did not allow the flexibility that this type of Programmer does. Whilst there are other makes of similar capabilities, This particular make is a well established brand with high quality integrity.
Bestätigter Kauf: JaZustand: Neu
von caalight
04. Mär. 2021
Great product
AAA +++ Great replacement for my old Honeywell controller and a great price. The old controller had been fitted right next to the hot water tank and they should not be fitted in an environment of 0-40 degrees Celsius. This had caused the plastic to become brittle and the switching to fail. I had to extend the cables to fit the unit on the outside of the airing cupboard. All good now. Some great features to this model including; a backlight that can has three modes, off, on, on when buttons are pressed. And fully programmable seven day timer. Saved us loads of money as the previous controller could only run on constant and the internal backup battery was failing. The new unit is slim sleek and stylish and does not look out of place in the guest room where I have fitted it. All the ... AAA +++ Great replacement for my old Honeywell controller and a great price. The old controller had been fitted right next to the hot water tank and they should not be fitted in an environment of 0-40 degrees Celsius. This had caused the plastic to become brittle and the switching to fail. I had to extend the cables to fit the unit on the outside of the airing cupboard. All good now. Some great features to this model including; a backlight that can has three modes, off, on, on when buttons are pressed. And fully programmable seven day timer. Saved us loads of money as the previous controller could only run on constant and the internal backup battery was failing. The new unit is slim sleek and stylish and does not look out of place in the guest room where I have fitted it. All the connections were like for like so there was no problem fitting the new cables to the connectors. Upon arrival the unit appeared to be packed well and it even arrived early! Very happy!
Bestätigter Kauf: JaZustand: NeuVerkauft von: boilerspares1885

Honeywell ST9400C 7-Tage elektronischer Programmierer mit 2-Kanal-

Sicher einkaufen

Artikelmerkmale

Über dieses Produkt

Product Identifiers

Product Key Features

Additional Product Features

Artikelbeschreibung des Verkäufers

timeclocks43

96,7% positive Bewertungen•274 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (63)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Great features, easy to install

Excellent Controller and ideal retrofit for 6400 series.

st9400c

Does what is required of it.

Great product

Noch mehr entdecken:

timeclocks43

96,7% positive Bewertungen•274 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (63)

Bild 1 von 3

Honeywell ST9400C 7-Tage elektronischer Programmierer mit 2-Kanal-

Sicher einkaufen

Artikelmerkmale

Über dieses Produkt

Product Identifiers

Product Key Features

Additional Product Features

Artikelbeschreibung des Verkäufers

timeclocks43

96,7% positive Bewertungen•274 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (63)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Great features, easy to install

Excellent Controller and ideal retrofit for 6400 series.

st9400c

Does what is required of it.

Great product

Noch mehr entdecken:

Related Searches