Bild 1 von 1

Frigidaire Lager- & Dichtsatz vorne Unterlegscheibe 131275200 131462800 131525500-

USA Part Source

(31192)

Mehr Artikel des Verkäufers

Verkäufer kontaktieren

US $39,99

Ca.EUR 34,20

Artikelzustand:

Neu

Stückzahl:

Mehr als 10 verfügbar521 verkauft

Voll im Trend. Schon 521 verkauft.

Ganz entspannt. Rückgaben akzeptiert.

Versand:

Kostenlos FedEx Ground or FedEx Home Delivery®.

Standort: Lapeer, Michigan, USA

Lieferung:

Lieferung zwischen Do, 24. Jul und Mo, 28. Jul nach 94104 bei heutigem Zahlungseingang

Rücknahme:

30 Tage Rückgabe. Käufer zahlt Rückversand. Wenn Sie ein eBay-Versandetikett verwenden, werden die Kosten dafür von Ihrer Rückerstattung abgezogen.

Zahlungen:

Sicher einkaufen

eBay-Käuferschutz

Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

Gratis Rückversand im Inland
Punkte für jeden Kauf und Verkauf
Exklusive Plus-Deals

Mehr erfahren- eBay Plus - wird in neuem Fenster oder Tab geöffnet

Der Verkäufer ist für dieses Angebot verantwortlich.

eBay-Artikelnr.:282076010140

Zuletzt aktualisiert am 08. Mär. 2023 17:04:03 MEZAlle Änderungen ansehenAlle Änderungen ansehen

Artikelmerkmale

Artikelzustand: Neu: Neuer, unbenutzter und unbeschädigter Artikel in nicht geöffneter Originalverpackung (soweit ... Neu: Neuer, unbenutzter und unbeschädigter Artikel in nicht geöffneter Originalverpackung (soweit eine Verpackung vorhanden ist). Die Verpackung sollte der im Einzelhandel entsprechen. Ausnahme: Der Artikel war ursprünglich in einer Nichteinzelhandelsverpackung verpackt, z. B. unbedruckter Karton oder Plastikhülle. Weitere Einzelheiten im Angebot des Verkäufers. Alle Zustandsdefinitionen aufrufenwird in neuem Fenster oder Tab geöffnet

Model: 131275200

Type: Brand New Replacement Washer Bearing and Seal Kit

Color: Black/Silver

MPN: KT1-114

Used on the Following Appliance Models: Crosley, Kenmore, Frigidaire, Gibson, GE

Replaces Part Numbers: 131525500 (AP2578105), 131275200 & 131462800

Front Load Washer Tub made by Electrolux: Frigidaire Gibson Kelvinator Westinghouse Kenmore

Brand: Real Power

Used on the Following Appliance Model(2): White-Westinghouse, Kenmore Sears-Canada and more.

UPC: Does not apply

Artikelbeschreibung des Verkäufers

Info zu diesem Verkäufer

Mitglied seit Jun 2013

Angemeldet als privater VerkäuferDaher finden verbraucherschützende Vorschriften, die sich aus dem EU-Verbraucherrecht ergeben, keine Anwendung. Der eBay-Käuferschutz gilt dennoch für die meisten Käufe. Mehr erfahrenMehr erfahren

USA Parts Source is a family owned and operated business specializing in HIGH QUALITY Catalytic Converters, Exhaust Manifolds, Pressure Washer Pumps and Accessories, Diesel & Gasoline Small Engine ...

Shop besuchen Kontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten

Genaue Beschreibung

4.8

Angemessene Versandkosten

5.0

Lieferzeit

4.9

Kommunikation

5.0

Small Engine PartsPressure Washer PumpTowing MirrorsWashing Machine PartsExhaust ManifoldsValve CoversRV Plugs and PartsCatalytic ConvertersNewest

Verkäuferbewertungen (27.452)

Dieser Artikel (2)

Alle Artikel (27.452)

t***r (69)- Bewertung vom Käufer.
Letztes Jahr
Bestätigter Kauf
Seller sent wrong seal with the kit even though it was supposed to fit my washer. Seller was completely unresponsive to resolve the problem (original seal on top, delivered one on bottom). I don’t want to redo this repair because I used the wrong seal.
p***p (508)- Bewertung vom Käufer.
Vor über einem Jahr
Bestätigter Kauf
The wrong parts were sent but the seller promptly took care of it.

Alle Bewertungen ansehen

Produktbewertungen & Rezensionen

Mehr erfahren

4.7

32 Produktbewertungen

27 Nutzer bewerten dieses Produkt mit 5 von 5 Sternen
2 Nutzer bewerten dieses Produkt mit 4 von 5 Sternen
1 Nutzer bewerten dieses Produkt mit 3 von 5 Sternen
1 Nutzer bewerten dieses Produkt mit 2 von 5 Sternen
1 Nutzer bewerten dieses Produkt mit 1 von 5 Sternen

Would recommend

Good value

Good quality

Relevanteste Rezensionen

Alle 26 Rezensionen ansehen

von tkoym99
14. Apr. 2017
Solid bearings, appear to be as good as OEM
Bearings appear to be just like OEM and are an excellent value for under $15. However, be prepared for a struggle to get the old ones out and the new ones back in. There is a reason that Sears does not sell them as separate parts. The You-Tube videos just show you the start of each process and what it looks like at the end, but not all the effort in the middle. Just so you know this is not a 5-minute drop in replacement process and if your bearings got really rusty, you may need to also clean out the inside of the tub to prevent more rust from getting on the clothes. Having said all that, I fully expect my front load washer to now last another 13 years. Once you have taken out the tub and are familiar with all the parts and how things are connected, this is not particularly ... Bearings appear to be just like OEM and are an excellent value for under $15. However, be prepared for a struggle to get the old ones out and the new ones back in. There is a reason that Sears does not sell them as separate parts. The You-Tube videos just show you the start of each process and what it looks like at the end, but not all the effort in the middle. Just so you know this is not a 5-minute drop in replacement process and if your bearings got really rusty, you may need to also clean out the inside of the tub to prevent more rust from getting on the clothes. Having said all that, I fully expect my front load washer to now last another 13 years. Once you have taken out the tub and are familiar with all the parts and how things are connected, this is not particularly complicated. As just an added note, if you have never replaced the shock absorbers on your front load machine, take advantage of this opportunity to do so since they will probably need it. The OEM shocks with the unit were really junk and the replacement ones on the market cost less than $20 and are far better quality. You have to disconnect them anyway to take out the tub, so you might as well replace them while you are at it since their cost is relatively minor compared to the effort to replace them by themselves. I replaced my OEM shocks at about 10 years and they were completely worthless when I took them out. If you are going to replace your bearings, go ahead and get the shocks too if you still have the original ones still in there. As just another note, the fabric softener tends to accumulate deposits over time in the dispenser. While you are in there, plan to take that out and clean it out. You probably don't want to completely take it apart, but we soaked it in vinegar and used pipe cleaners in the passageways and now the fabric softener compartment drains properly again.
Bestätigter Kauf: JaZustand: NeuVerkauft von: usapartsource
von ranhog47
10. Feb. 2019
wassher berrings install
not easy to install with out proper tools that i did not have, once the spin/drum is removed from washer its a battle of using a hammer sockets screw drivers eye site and of coarse a nut driver battery operated preferred carefully clean scrape & sand bearing sockets before installing new bearings find a short block of wood and the perfect sises socket for reinstall of new bearings if you are a back yard maniac like me it tuck me about 4 & 1/2 hrs & about 4 days for the bearings to arrive at my address.washer bearings installnot easy to install with out proper tools that i did not have, once the spin/drum is removed from washer its a battle of using a hammer sockets screw drivers eye site and of coarse a nut driver battery operated preferred carefully clean scrape & sand bearing sockets before installing new bearings find a short block of wood and the perfect sises socket for reinstall of new bearings if you are a back yard maniac like me it tuck me about 4 & 1/2 hrs & about 4 days for the bearings to arrive at my address.washer bearings install
Bestätigter Kauf: JaZustand: Neu
von jackychanjr
20. Apr. 2017
Washer bearing kit
The bearings and seal kit fits and no more noise. It works as a new unit for now. Due to cheap price, not sure how long it will last but I save hundreds of $$ by replacing the parts instead of buying a new unit. It was easy to put on.
Bestätigter Kauf: JaZustand: NeuVerkauft von: usapartsource
von dawnsray
28. Feb. 2018
Great alternative to tub replacement
Replacing the bearings and seal in the rear outer tub is the only logical remedy for failed bearings due to seal leakage .Yes it involves some work and tools but there are several videos on line that will walk you thru the steps .I cleaned the inner tub and outer with a mineral remover like Lime Away or CLR and pressure washed . Looks like new .Saved over $400.00 The bearings in the kit are sealed type. The seal has an exposed spring which is different than the factory seal with no springs and apparently made for the appliance mfr. That said I lightly coated the spring with plumbers grease although it is probably corrosion resistant should some water ever come in contact with it .Replacing the bearings and seal in the rear outer tub is the only logical remedy for failed bearings due to seal leakage .Yes it involves some work and tools but there are several videos on line that will walk you thru the steps .I cleaned the inner tub and outer with a mineral remover like Lime Away or CLR and pressure washed . Looks like new .Saved over $400.00 The bearings in the kit are sealed type. The seal has an exposed spring which is different than the factory seal with no springs and apparently made for the appliance mfr. That said I lightly coated the spring with plumbers grease although it is probably corrosion resistant should some water ever come in contact with it .
Bestätigter Kauf: JaZustand: NeuVerkauft von: usapartsource
von psdsd
15. Sep. 2017
Frigidaire Front Load Washer Replacement Drum Bearings And Seal.
I haven't installed them yet because I ran into another problem, a cracked spider. When I resolve that issue I'll complete the job. I have no doubt the job will turn out okay once I resolve the spider issue.
Bestätigter Kauf: JaZustand: NeuVerkauft von: usapartsource

Bild 1 von 1

Frigidaire Lager- & Dichtsatz vorne Unterlegscheibe 131275200 131462800 131525500-

Sicher einkaufen

Artikelmerkmale

Artikelbeschreibung des Verkäufers

USA Part Source

98,3% positive Bewertungen•126.109 Artikel verkauft

Detaillierte Verkäuferbewertungen

Beliebte Kategorien in diesem Shop

Verkäuferbewertungen (27.452)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Solid bearings, appear to be as good as OEM

wassher berrings install

Washer bearing kit

Great alternative to tub replacement

Frigidaire Front Load Washer Replacement Drum Bearings And Seal.

Noch mehr entdecken:

USA Part Source

98,3% positive Bewertungen•126.109 Artikel verkauft

Detaillierte Verkäuferbewertungen

Beliebte Kategorien in diesem Shop

Verkäuferbewertungen (27.452)

Bild 1 von 1

Frigidaire Lager- & Dichtsatz vorne Unterlegscheibe 131275200 131462800 131525500-

Sicher einkaufen

Artikelmerkmale

Artikelbeschreibung des Verkäufers

USA Part Source

98,3% positive Bewertungen•126.109 Artikel verkauft

Detaillierte Verkäuferbewertungen

Beliebte Kategorien in diesem Shop

Verkäuferbewertungen (27.452)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Solid bearings, appear to be as good as OEM

wassher berrings install

Washer bearing kit

Great alternative to tub replacement

Frigidaire Front Load Washer Replacement Drum Bearings And Seal.

Noch mehr entdecken:

Related Searches