MakeModelYearVariantTypeChassisEngine

Bild 1 von 6

Hochwertiger CV Boot Kit Split Sticky Zerrissen Antriebswelle Reparatur spart Zeit + Geld-

STYLARIZE

(11401)

Mehr Artikel des Verkäufers

Verkäufer kontaktieren

£14,99

(inkl. MwSt.)

Ca.EUR 17,36

Artikelzustand:

Neu

Fahrzeugliste:

Alle kompatiblen Fahrzeuge ansehen

Stückzahl:

32 verfügbar57 verkauft

Ganz entspannt. Rückgaben akzeptiert.

In guter Gesellschaft. 27 Leute beobachten das.

Dieser Artikel wird über das eBay-Programm zum weltweiten Versand verschickt.

Mit internationaler Sendungsverfolgung, vereinfachter Zollabfertigung und ohne zusätzliche Gebühren bei Lieferung. Mehr erfahren

Versand:

£16,35 (ca. EUR 18,94) International Priority Shipping nach USA mit eBay-Programm zum weltweiten Versand.

Standort: GB, Vereinigtes Königreich

Einfuhrabgaben:

Kostenlos (Betrag wird an der Kasse bestätigt)

Lieferung:

Lieferung zwischen Fr, 29. Aug und Di, 9. Sep nach 94104 bei heutigem Zahlungseingang

Mit internationaler Sendungsverfolgung

Rücknahme:

Keine Rücknahme.

Zahlungen:

Internationale Versandkosten und Einfuhrabgaben gezahlt an Pitney Bowes Inc. Mehr erfahrenWeitere Informationen über das Programm zum weltweiten Versand

Sicher einkaufen

eBay-Käuferschutz

Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

Gratis Rückversand im Inland
Punkte für jeden Kauf und Verkauf
Exklusive Plus-Deals

Mehr erfahren- eBay Plus - wird in neuem Fenster oder Tab geöffnet

Der Verkäufer ist für dieses Angebot verantwortlich.

eBay-Artikelnr.:256307660319

Zuletzt aktualisiert am 19. Aug. 2025 21:01:50 MESZAlle Änderungen ansehenAlle Änderungen ansehen

Kompatibilität

Teil ist kompatibel mit 2991 Fahrzeug(en)

Make	Model	Year	Variant	Type	Chassis	Engine
Audi	A3	2023	Petrol Hatch	S3 quattro	AWD -- 8YA,8YF	1984cc 228KW 310HP DNFB
Audi	A3	2023	Petrol Hatch	30 TFSI	FWD -- 8YA,8YF	999cc 81KW 110HP DLAA
Audi	A3	2023	Petrol Hatch	30 g-tron	FWD -- 8YA,8YF	1498cc 96KW 131HP DHFA
Audi	A3	2023	Petrol Hatch	35 TFSI	FWD -- 8YA,8YF	1498cc 110KW 150HP DPCA
Audi	A3	2022	Petrol Hatch	S3 quattro	AWD -- 8YA,8YF	1984cc 228KW 310HP DNFB
Audi	A3	2022	Petrol Hatch	30 TFSI	FWD -- 8YA,8YF	999cc 81KW 110HP DLAA
Audi	A3	2022	Petrol Hatch	30 g-tron	FWD -- 8YA,8YF	1498cc 96KW 131HP DHFA
Audi	A3	2022	Petrol Hatch	35 TFSI	FWD -- 8YA,8YF	1498cc 110KW 150HP DPCA
Audi	A3	2021	Petrol Hatch	S3 quattro	AWD -- 8YA,8YF	1984cc 228KW 310HP DNFB
Audi	A3	2021	Petrol Hatch	30 TFSI	FWD -- 8YA,8YF	999cc 81KW 110HP DLAA
Audi	A3	2021	Petrol Hatch	30 g-tron	FWD -- 8YA,8YF	1498cc 96KW 131HP DHFA
Audi	A3	2021	Petrol Hatch	35 TFSI	FWD -- 8YA,8YF	1498cc 110KW 150HP DPCA
Audi	A3	2020	Petrol Hatch	2.0 TFSI quattro	AWD -- 8VA,8VF	1984cc 140KW 190HP CZPB;DKZA
Audi	A3	2020	Petrol Hatch	40 TFSI quattro	AWD -- 8VA,8VF	1984cc 140KW 190HP DKZA
Audi	A3	2020	Petrol Hatch	S3 quattro	AWD -- 8VA,8VF	1984cc 221KW 300HP CJXC;DNUE
Audi	A3	2020	Petrol Hatch	S3 quattro	AWD -- 8YA,8YF	1984cc 228KW 310HP DNFB
Audi	A3	2020	Petrol Hatch	1.4 TFSI	FWD -- 8VA,8VF	1395cc 90KW 122HP CMBA;CXSA
Audi	A3	2020	Petrol Hatch	1.4 TFSI g-tron	FWD -- 8VA,8VF	1395cc 81KW 110HP CPWA
Audi	A3	2020	Petrol Hatch	2.0 TFSI	FWD -- 8VA,8VF	1984cc 140KW 190HP CZPB;DKZA
Audi	A3	2020	Petrol Hatch	30 TFSI	FWD -- 8VA,8VF	999cc 85KW 116HP DKRF

Einige der in dieser Tabelle aufgeführten Informationen wurden bereitgestellt von stylarize

Artikelmerkmale

Artikelzustand: Neu: Neuer, unbenutzter und unbeschädigter Artikel in der ungeöffneten Originalverpackung (soweit ... Neu: Neuer, unbenutzter und unbeschädigter Artikel in der ungeöffneten Originalverpackung (soweit eine Verpackung vorhanden ist). Die Verpackung sollte der im Einzelhandel entsprechen. Ausnahme: Der Artikel war ursprünglich in einer Nichteinzelhandelsverpackung verpackt, z. B. unbedruckter Karton oder Plastikhülle. Weitere Einzelheiten im Angebot des Verkäufers. Alle Zustandsdefinitionen aufrufenwird in neuem Fenster oder Tab geöffnet

Brand: Bailcast

Manufacturer Part Number: CVS18

Reference OE/OEM Number: CVS18

Type: CV Boot Kit

Country/Region of Manufacture: United Kingdom

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

USt-IdNr.: GB 475291370

CRN: 12230083

Info zu diesem Verkäufer

Mitglied seit Mär 2015

Antwortet meist innerhalb 6 Stunden

Angemeldet als gewerblicher Verkäufer

Shop besuchen Kontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten

Genaue Beschreibung

4.9

Angemessene Versandkosten

5.0

Lieferzeit

4.9

Kommunikation

5.0

Verkäuferbewertungen (10.940)

Dieser Artikel (32)

Alle Artikel (10.940)

*****- Bewertung vom Käufer.
Letzte 6 Monate
Bestätigter Kauf
Have used split boots before. They work well as long as the instructions are closely followed. The kit content includes all needed to complete the job.
*****- Bewertung vom Käufer.
Letzte 6 Monate
Bestätigter Kauf
Uk made item, looks quality, all good!
*****- Bewertung vom Käufer.
Letzte 6 Monate
Bestätigter Kauf
Good quality

Alle Bewertungen ansehen

Produktbewertungen & Rezensionen

Mehr erfahren

4.2

357 Produktbewertungen

224 Nutzer bewerten dieses Produkt mit 5 von 5 Sternen
57 Nutzer bewerten dieses Produkt mit 4 von 5 Sternen
33 Nutzer bewerten dieses Produkt mit 3 von 5 Sternen
14 Nutzer bewerten dieses Produkt mit 2 von 5 Sternen
29 Nutzer bewerten dieses Produkt mit 1 von 5 Sternen

Would recommend

Good value

Good quality

Relevanteste Rezensionen

Alle 300 Rezensionen ansehen

von finestfunster
27. Mär. 2018
Can be tricky to fit but worth it.
Its well worth the money if you fit it well. The boot is strong and made of a good quality material. Its important to clean the whole area before you start.. Practice before gluing. I had to hold in position longer before the glue set and then leave it for several more minutes before putting in final position. After fitting I leave it a couple of hours before driving car. The tricky part is holding it all carefully whilst the glue is drying as you need all of you fingers and thumbs for it. Its well worth the money if you fit it well. The boot is strong and made of a good quality material. Its important to clean the whole area before you start.. Practice before gluing. I had to hold in position longer before the glue set and then leave it for several more minutes before putting in final position. After fitting I leave it a couple of hours before driving car. The tricky part is holding it all carefully whilst the glue is drying as you need all of you fingers and thumbs for it.
Bestätigter Kauf: JaZustand: NeuVerkauft von: matthews3729
von CsnhLuDNTu-@Deleted
19. Jan. 2019
Great product and it is fairly easy to install for someone mechanically-minded!
I bought this awesome split boot to replace a cv joint boot that was frayed in two with grease exposed to the elements, on my Japanese import vehicle which does not have a presence here in Canada nor the USA, thus parts are hard to find. Upon inspection, I found that the grease had not come out yet, so the damage to the installed boot was new and the cv joint absolutely was worth saving. If the joint has lost all its grease and has started clacking, then the joint and boot must both be replaced. I put the car on drive-up ramps and cut out the existing boot, then followed the install instructions for the new boot, after fully cleaning the shaft with acetone, to remove dirt and also removing as much old grease from the joint as I could. The temperature during the gluing was -3C and I had to ... I bought this awesome split boot to replace a cv joint boot that was frayed in two with grease exposed to the elements, on my Japanese import vehicle which does not have a presence here in Canada nor the USA, thus parts are hard to find. Upon inspection, I found that the grease had not come out yet, so the damage to the installed boot was new and the cv joint absolutely was worth saving. If the joint has lost all its grease and has started clacking, then the joint and boot must both be replaced. I put the car on drive-up ramps and cut out the existing boot, then followed the install instructions for the new boot, after fully cleaning the shaft with acetone, to remove dirt and also removing as much old grease from the joint as I could. The temperature during the gluing was -3C and I had to hold the first section of the new boot together for much longer than the recommended 45 secs, instead it was more like 2 mins. This was hard, and I had to do it a couple of times before the glue set. If you are installing at such low temperatures, I would suggest an assistant hold a hair dryer to warm the glue, to make it set faster. The remaining segments to glue were a cinch since there was no tension. Once the clamps were on, I had an easy to install low-cost split boot on my car and away I went. In North America we have a similar product made by Doorman. I chose not to buy this product because it was 2-3 times the cost of the British sticky boot, and I had to order it in anyway. The main thing that stopped me was not the cost however, it was the design of the Doorman product- it consisted of 2 sections and thus twice the work with the glue! This was not worth my time, the Stickyboot is a far better product!
Bestätigter Kauf: JaZustand: NeuVerkauft von: aceparts_uk
von roberhartle-6
02. Nov. 2022
Mixed Review for Bailcast CV Gaiter
The split gaiter wasn't great when trying to fit it to a Micra K11 (2000). The universal nature of the gaiter meant that cutting it to size didn't really suit the dimensions of the Micra to the extent that trying to make it secure was a problem for me. I had to get a garage to secure it properly. Also tricky when trying to carry out the instructons underneath the car. I will not use it again if I need to get another CV gaiter for the Micra. Shame because in theory it should have worked more easily and I would have liked it to have worked as I would have saved me money. The split gaiter wasn't great when trying to fit it to a Micra K11 (2000). The universal nature of the gaiter meant that cutting it to size didn't really suit the dimensions of the Micra to the extent that trying to make it secure was a problem for me. I had to get a garage to secure it properly. Also tricky when trying to carry out the instructons underneath the car. I will not use it again if I need to get another CV gaiter for the Micra. Shame because in theory it should have worked more easily and I would have liked it to have worked as I would have saved me money.
Bestätigter Kauf: JaZustand: NeuVerkauft von: boughty145
von kentrob123
03. Jul. 2020
A temp measure only if you are selling car or MOT
This is a temp measure only. This is the 5th split sticky boot Ive fitted in two years to the same vehicle. After about 6 months the glue in parts of the boot wears off and grease starts to seep out. I recommend if you are doing it yourselve instead of using the CV boot clip order the CV Band. There is a knack to put them on but work perfect and hold the CV boot in place. Also another tip is where you glue the outside of the boot try and glue inside the boot where it joins together once the outside is dryThis is a temp measure only. This is the 5th split sticky boot Ive fitted in two years to the same vehicle. After about 6 months the glue in parts of the boot wears off and grease starts to seep out. I recommend if you are doing it yourselve instead of using the CV boot clip order the CV Band. There is a knack to put them on but work perfect and hold the CV boot in place. Also another tip is where you glue the outside of the boot try and glue inside the boot where it joins together once the outside is dry
Bestätigter Kauf: JaZustand: NeuVerkauft von: direct-autospares
von anjumc2007
13. Aug. 2018
Very good quality product , easy to fit ,saves a lot of time and hard work
The product is very good quality , comes with all the things that you need to replace the existing one. Its very easy to use , clean the existing area , measure and cut as necessary. Next pack the bearing with grease (provided with kit) clean any excess, place the rubber boot and start gluing and holding tight , remember to do it in small sections 1" at a time , hold for about a minute and start next section. when finished and located in the right place attached the clips provided , it save a lot of time that would be wasted in dismantling the suspension. A very good product. The product is very good quality , comes with all the things that you need to replace the existing one. Its very easy to use , clean the existing area , measure and cut as necessary. Next pack the bearing with grease (provided with kit) clean any excess, place the rubber boot and start gluing and holding tight , remember to do it in small sections 1" at a time , hold for about a minute and start next section. when finished and located in the right place attached the clips provided , it save a lot of time that would be wasted in dismantling the suspension. A very good product.
Bestätigter Kauf: JaZustand: Neu

Dies ist ein Angebot mit nicht öffentlicher Bieter-/Käuferliste. Nur der Verkäufer kann Ihren Nutzernamen sehen.

Bestätigen, dass das Teil passt

Fügen Sie Ihr Fahrzeug hinzu, um sicherzugehen, dass der Artikel passt und eine kostenlose Rücksendung möglich ist.

Bild 1 von 6

Hochwertiger CV Boot Kit Split Sticky Zerrissen Antriebswelle Reparatur spart Zeit + Geld-

Sicher einkaufen

Kompatibilität

Artikelmerkmale

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

STYLARIZE

99,6% positive Bewertungen•27.724 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (10.940)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Can be tricky to fit but worth it.

Great product and it is fairly easy to install for someone mechanically-minded!

Mixed Review for Bailcast CV Gaiter

A temp measure only if you are selling car or MOT

Very good quality product , easy to fit ,saves a lot of time and hard work

Noch mehr entdecken:

STYLARIZE

99,6% positive Bewertungen•27.724 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (10.940)

Bestätigen, dass das Teil passt

Fügen Sie Ihr Fahrzeug hinzu, um sicherzugehen, dass der Artikel passt und eine kostenlose Rücksendung möglich ist.

Bild 1 von 6

Hochwertiger CV Boot Kit Split Sticky Zerrissen Antriebswelle Reparatur spart Zeit + Geld-

Sicher einkaufen

Kompatibilität

Artikelmerkmale

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

STYLARIZE

99,6% positive Bewertungen•27.724 Artikel verkauft

Detaillierte Verkäuferbewertungen

Verkäuferbewertungen (10.940)

Produktbewertungen & Rezensionen

Relevanteste Rezensionen

Can be tricky to fit but worth it.

Great product and it is fairly easy to install for someone mechanically-minded!

Mixed Review for Bailcast CV Gaiter

A temp measure only if you are selling car or MOT

Very good quality product , easy to fit ,saves a lot of time and hard work

Noch mehr entdecken:

Related Searches