MOMENTAN AUSVERKAUFT

All Industrial 1 Matched Pair Ultra Precision 1-2-3 Blocks 23 Holes .0001" Machinist 123 Jig (30000212)

Über dieses Produkt

Product Identifiers

BrandAll Industrial
MPN30000212
GTIN0647829670719
UPC0647829670719
eBay Product ID (ePID)18010597873

Product Key Features

ShapeRectangular
MaterialHardened Ground Steel
Instrument TypePrecision Gage Block

Bewertungen und Rezensionen

4.6
37 Produktbewertungen
  • 30 Nutzer haben dieses Produkt mit 5 von 5 Sternen bewertet
  • 2 Nutzer haben dieses Produkt mit 4 von 5 Sternen bewertet
  • 3 Nutzer haben dieses Produkt mit 3 von 5 Sternen bewertet
  • 1 Nutzer haben dieses Produkt mit 2 von 5 Sternen bewertet
  • 1 Nutzer haben dieses Produkt mit 1 von 5 Sternen bewertet

Good value

Would recommend

Good quality

Relevanteste Rezensionen

  • Decent set up blocks.

    I bought these for a specific project that needed some support in the mill. I figured for what I was doing they only had to be close so cheap was fine. To my surprise,I must have gotten a good set because they are really close end for end. Thickness was only off by .0003 or three ten thousanths of an inch on the long end and about .0002 over the 2" dimension. They are close enough for everything I am going to do with them and better than I expected. I could have spent five times the money and only gotten a little more accuracy. Very good for the money and very handy on the milling machine.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Awesome 123 blocks, high quality at a low price

    I was hesitant at first to purchase these 123 blocks as I have gotten some before and you could see right of away that they were of very poor quality but I needed a new set and decided to get these. The price on these was not much higher from the previous set and thus the hesitation to purchase but when I received them... WOW! I'm very pleased with everything about these blocks, they have a nice finish, all corners and edges are all smooth and linear, and all holes are even and no rough edges anywhere but most important still, the measurements are dead on with the exception of width on one at .0004. All measurements are well within where I need them to be. Very good quality for an amazing price.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Cute paper weights but not usable for precision work.

    I don't make a habit of bad mouthing products unless there is a genuine problem. I purchases two pair of matched 1-2-3 blocks that state they were accurate to .0002" but in reality, they were 5x out of specification than the advertised accuracy. I found consistent milling errors across the 3" surface of more than .001" on (4) different Starrett depth gauges that all repeat properly and read VERY accurately. I had to hand lap the blocks into precise tolerance as needed, hence the blocks are no longer 1x2x3 inch. Labor cost far exceeded the cost of the blocks themselves. Do yourself a favor and pay the money for good quality somewhere else. These blocks were just way out from specification and a waste of my valuable time.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Extremely accurate + 0.00015

    Starting out I was skeptical because it’s eBay and it was cheap. However I am extremely pleased with the product. I had our QA guy check them over with our state of the art equipment, the first block was “ dead nuts “ on every dimension including Hole locations. The second was only 0.00015 oversized in the 3 inch dimension. I highly recommend buying a set

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Perfect weights for kit building

    These are the size and weight advertised. I purchased these to help hold wooden kit walls flat and level while the glue dries. Not only are the square which helps with wall angles, they are plenty heavy to hold down walls while drying. I will be buying another set or two.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • 1 Matched Pair Ultra Precision 1-2-3 Blocks 23 Holes .0001" Machinist 123 JIg

    I'm a model railroader and use these for gluing things together to keep them square. At .0001 accuracy ya can't get any better than that. Of course these have many other uses but I use them for keeping things square while building model buildings, etc. They also make good weights when gluing two surfaces together. I highly recommend them especially for model building in general. They come packed in grease so will have to be cleaned (not with water) before use. I've heard others say that they rusted, but probably were cleaned with soap and water, These are precision steel tools and should be treated as such.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • A+ and very surprised in a good way.

    Totally surprised at the accuracy for the money. Even though I would catch them on rough threads in the threaded holes but it didn't happen. Very nice finish. Come well packed. Wrapped in rust preservative paper and plastic bagged. You can't make this stuff for the money.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Excellent sheep speed, product in good s...

    Excellent sheep speed, product in good shape.

    Bestätigter Kauf: JaArtikelzustand: Gebraucht

  • Well made tool.

    Well made. Tolerances are wiithin +/-.001" (using my micrometer) and have made my drilling with my drill press much more accurate.

    Bestätigter Kauf: JaArtikelzustand: Neu

  • Great product for perfectly squaring things up.

    Nicely machined and smooth edges allows you to perfectly square up sides. Has come into use for some panels I have already made for a build that is going on.

    Bestätigter Kauf: JaArtikelzustand: Neu

Weitere Artikel mit Bezug zu diesem Produkt