Bild 1 von 5
Standardbild
Bild 1 von 5
Standardbild
Sealey TJ150E 150Kg Floor Transmission Jack
McCormick Tools Ltd (266279)
99,7% positive Bewertungen
Preis:
£148,79
Ca.EUR 172,44
+ £27,28 Versand
Rücknahme:
14 Tage Rückgabe. Käufer zahlt Rückversand. Wenn Sie ein eBay-Versandetikett verwenden, werden die Kosten dafür von Ihrer Rückerstattung abgezogen.
Artikelzustand:
Capacity: 150kg. Suitable for raising and lowering gearboxes and differential units. shaun131 : spot on a +++++++++++++++. Minimum Saddle Height: 195mm. Nett Weight: 17.89kg. Manufacturers Warranty: 1 Year.
- Sofort-KaufenSealey TJ150E Bodengetriebeheber 150kg
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
Sammeln Sie 172 Punkte | Mehr erfahrenzu eBay Plus-Punkten - wird in neuem Fenster oder Tab geöffnet
Über dieses Produkt
Product Identifiers
BrandSealey
MPNTJ150E
Manufacturer Part NumberTJ150E
EAN5051747732209
GTIN5051747732209
eBay Product ID (ePID)2305807447
Product Key Features
DriveHydraulic
Number of Pieces1
MaterialSteel
TypeTransmission Jack
Set or Single ItemSingle Item
Dimensions
Weight114lb./52kg
Additional Product Features
Capacity150kg
Alle Angebote für dieses Produkt
Bewertungen und Rezensionen
Relevanteste Rezensionen
- 27. Sep. 2017
Not very good.....
Prior to purchasing this item, I had high hopes that this transmission jack would make my life a lot easier when it comes to removing and replacing gearboxes which I do on quite a regular basis. However, the reality is somewhat different!!! There are several things wrong with this jack, firstly the surface you put the gearbox on is not fit for purpose. Being a 'V'shape is fine if you have a flat bottomed gearbox, but how many gearbox casings are just flat? The ones i remove and refit have lumps and bumps everywhere meaning the gearbox does not sit straight and is impossible to get back in position. Whilst on the subject of that surface, it's always made of nice shiny metal which with another metal surface (gearbox) together they like to slide around a lot again making it very difficult to keep the gearbox steady and in position. The jacking system is very difficult and fiddly to jack up. Instead of the rotating mechanism it has, it could do with a standard trolley jack 'up and down' system. By having the rotating system, I found that I needed to use my ratchet to lift the jack up whilst holding the jack body to prevent it moving around. Lastly, the actually scissor system when extended is no where near sturdy enough! I had a Mondeo 6 speed gearbox strapped to the jack and 3/4 extended up and the jack was leaning over at about a 25 degree angle and it eventually fell over!!! Basically, this jack is not fit for the job it was designed for and is not substantial enough to take the weight of JUST a Mondeo gearbox. I am very disappointed as SEALEY are a well known brand when it comes to tools etc and they are usually of very good quality. However, this is rubbish. Not worth the £100 I paid for it!Bestätigter Kauf: JaArtikelzustand: Neu
- 12. Feb. 2019
SEALEY TRANSMISSION JACK, 150KG TJ150E
this great transmission jack made by sealey is a good weight to prove it will last many years to come it's universal and can be used also for rear axel's leaving your hands free and not doing yourself injury making it worth while by completing the task quicker, this transmission jack has wheel's so it can be moved around under the vehicle making it easier to line up the correct position making it safer so the gearbox stay's on in the correct position on the jack, so no injury to you, by the gearbox dropping off the jack, this jack also has a strap to secure the gearbox so if you needed to bring the jack out from under the car/van etc this add's extra safety,Bestätigter Kauf: JaArtikelzustand: Neu
- 15. Sep. 2021
Sealey TJ150E Transmission Jack
It's a well made item and good for maneuvering heavy items. It would be fine for lifting a diff. It's let down by the strap mechanism. The ratchet can't be operated where access is tight e.g. in a transmission tunnel which is where transmissions tend to be located. So this feature isn't much good. That said it can still be used to lower and raise gearboxes just not as well as one might hope.Bestätigter Kauf: JaArtikelzustand: Neu
- 01. Apr. 2020
MX5 Clutch replacement
Used to remove and replace gearbox from MX5 on my own, with vehicle on axle stands. Didn't fancy the Youtube method of resting gearbox on my chest, after doing the job I would have found that method dangerous if not impossible. While product isn't perfect, main issue being slippery metal surface and fixing strap, no space to tension for gearbox removal but it was possible to use for re-fitting, after fitting gearbox removed one of the bolts holding on the strap. Without this I couldn't have done the job safely on my own. With refitting it was possible to leave gearbox supported, then check inside engine bay for etc for problems as well as jacking engine to align with gear box. Excellent value and solid construction for the home mechanic working on their own.
Bestätigter Kauf: JaArtikelzustand: Neu
- 14. Okt. 2020
Sealey transmission/gearbox jack.
Will make the job of removing my gearbox,so much easier.Perhaps not ideal for front wheel drive cars where the engine and transmission unit is combined,but for rear wheel drive cars,I would recomend it.Bestätigter Kauf: JaArtikelzustand: Neu
- 18. Apr. 2018
About jack
Quite hard to lift it up by the ratchet,one hand must to hold the gearbox the other must to struggle pushing the ratchet. The top surface where the gearbox stands is so slippery,I had to stick a piece of rubber between between jack and geat But at the end,it does the job,I could have do it without itBestätigter Kauf: JaArtikelzustand: Neu
- 14. Sep. 2018
Nice bit of kit
It's really well built and does exactly what its supposed to. You may not have a great deal of use for one of these as an amateur but if like me you have ever struggled with a clutch change, then this thing is amazing!!Bestätigter Kauf: JaArtikelzustand: Neu
- 05. Dez. 2019
Did the job! And did it well😀
Makes moving gearboxes (and engines) easy. Especially extracting and installing on your drive!Bestätigter Kauf: JaArtikelzustand: Neu
- 31. Jul. 2022
Wow
Works very well , if you work on your own out a van this is a must have , I used a block of wood to get it to sit wright , made the job so much easier when it come to put the gear box back in , I would say dont use an inpacked gun as it moves up and down to fast , much more control with a hand ratchet.
Bestätigter Kauf: JaArtikelzustand: Neu
- 25. Dez. 2019
Sealey floor transmission jack
Almost crushed my hand trying to bench press a rebuilt diff back into an axle. With a fabricated bracket bolted on, it was a simple one man job and with the bracket unbolted will still be perfect for transmissions. Recommended!Bestätigter Kauf: JaArtikelzustand: Neu
