MOMENTAN AUSVERKAUFT
Über dieses Produkt
Product Identifiers
BrandTaurus
MPN511221PLY
GTIN0725327610304
UPC0725327610304
ModelPT22 Poly .22LR
eBay Product ID (ePID)2255494935
Product Key Features
For Gun TypeHandgun
Number of Rounds8
Dimensions
Weight0.000
Width0.0
Bewertungen und Rezensionen
Relevanteste Rezensionen
- 21. Dez. 2018
GREAT MAG AND GUN
THIS A GREAT MAG , BUT IT MUST BE SLIGHTLY MODIFIED TO FUNCTION PROPERLY. THE TOP OF THE ENGAGEMENT HOLE FOR THE MAG CATCH SHOULD BE SLIGHTLY FILED TO LOWER THE MAG FOR EASY INSERTION. ONLY ABOUT .002 . YOU CAN DISASSEMBLE THE MAG AND FILE OR SAND THE BOTTOM OF THE MAG FOLLWER A BIT TO ADD AN EXTRA ROUND, LITTLE AT A TIME. I ALSO POLISHED THE FEED RAMP WITH A DREMMEL . NOW I HAVE A 10 SHOT 22 LR BACKUP I'LL WILL TAKE INTO BATTLE. HOPES THIS HELPS GREAT GUN AND MAG!Bestätigter Kauf: JaArtikelzustand: Neu
- 05. Jul. 2016
Right mag, if you can find it.
This difficult to find factory magazine is the correct one for the PT-22 poly model. Works as it should, needing no adjustment. Easy and simple to load. I keep several, fully loaded and rotate one empty weekly to relax the spring. After a year, the tension has only relaxed a tiny amount. They are a bit pricey for the materials in it, but scarcity/demand keeps the price up.Bestätigter Kauf: JaArtikelzustand: Neu
- 02. Jun. 2016
PT22LR Magazine Review
This product is a perfect fit and performer for the Taurus PT22LT handgun. It loads easily and slides and locks into the handgun without any difficulty. The end grip provides for a more stable handhold of the handgun while shooting. A good buy at a reasonable price with excellent delivery.Bestätigter Kauf: JaArtikelzustand: Neu
- 20. Apr. 2016
Needs a little tweaking
This mag has a different shoe than the original one that came with my PT22. It fits but needs to be tapped firmly upward to get it to seat in the handle. Stays in place securely once it is seated but can easily drop out if you don't hit it hard enough to make it click into place.Bestätigter Kauf: JaArtikelzustand: Neu
- 10. Jul. 2019
Perfect, might be better than the original
First I didn't think it would work without tweaking like some reviewers have stated. It's polymer not metal but it still works. The holes were tighter and it took me a bit to figure it out but it worked so well. On my original I had one FTF, but it was with some cheap ammo, not CCI and this one there were no problems cheap ammo or not. I would buy again if I wanted another magazine.Bestätigter Kauf: JaArtikelzustand: Neu
- 20. Dez. 2018
Does not seem as good as it should be
This magazine is greatly inferior to the magazine that came with the pistol. Curious because is appears to be made by Taurus. 1) The fingers at the top are bent in too much and it is difficult to load bullets. 2) The magazine does not easily slide into the pistol (sticky like it is too wide). 3) When the magazine is fully inserted into the pistol it does not click into place, it will just pull right back out without pushing the release button. The only way to get it to latch is too push it in all the way, and then give it an additional smack. The magazine that came with the pistol works very nicely, like expected, so I have something to compare to.Bestätigter Kauf: JaArtikelzustand: Neu
- 15. Mai. 2018
Great Magazines
Ordered 2 of these, They are excellent. No problems what so ever. went out and shot over 200 rounds through them. They fit perfect.Bestätigter Kauf: JaArtikelzustand: Neu
- 13. Apr. 2016
loading mag, A stiff piece of wire works tp load this mag
As stated above using a stiff piece of wire through the small hole. pull down the spring and it loads very easilyBestätigter Kauf: JaArtikelzustand: Neu
- 27. Nov. 2018
Pleased in every way.
Had been looking for one of these for a while and was glad to see it available. Even more glad when it arrived and I tried it out. Perfect!! Alan Morehead City, N.C.Bestätigter Kauf: JaArtikelzustand: Neu
- 09. Jan. 2019
There factory mags, the only way to go.
Bestätigter Kauf: JaArtikelzustand: Neu
