CORVETTE UNDER HOOD CROSSED FLAG METAL EMBLEM FITS C6 05-13 EXCEPT ZR1

INDY-MOTORWERKS
(42470)
Angemeldet als gewerblicher Verkäufer
US $78,96
Ca.EUR 68,06
Artikelzustand:
Neu
Weitere Informationen zu diesem Artikelzustand
Mehr als 10 verfügbar231 verkauft
Voll im Trend. Schon 231 verkauft.
Ganz entspannt. Kostenloser Versand & Rückversand.
Versand:
Kostenlos USPS Priority Mail®.
Standort: Indianapolis, Indiana, USA
Lieferung:
Lieferung zwischen Sa, 1. Nov und Mi, 5. Nov nach 94104 bei heutigem Zahlungseingang
Wir wenden ein spezielles Verfahren zur Einschätzung des Liefertermins an – in diese Schätzung fließen Faktoren wie die Entfernung des Käufers zum Artikelstandort, der gewählte Versandservice, die bisher versandten Artikel des Verkäufers und weitere ein. Insbesondere während saisonaler Spitzenzeiten können die Lieferzeiten abweichen.
Versand heute bei Bestellung innerhalb der nächsten 2 Std 42 Min
Rücknahme:
30 Tage Rückgabe. Kostenloser Rückversand.
Zahlungen:
   Diners Club 

Sicher einkaufen

eBay-Käuferschutz
Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

  • Gratis Rückversand im Inland
  • Punkte für jeden Kauf und Verkauf
  • Exklusive Plus-Deals
Der Verkäufer ist für dieses Angebot verantwortlich.
eBay-Artikelnr.:142512879019
Zuletzt aktualisiert am 13. Jun. 2025 04:38:05 MESZAlle Änderungen ansehenAlle Änderungen ansehen

Artikelmerkmale

Artikelzustand
Neu
Brand
INDY-MOTORWERKS
Manufacturer Part Number
845698
UPC
615953594669
Kategorie

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

Ich versichere, dass alle meine Verkaufsaktivitäten in Übereinstimmung mit allen geltenden Gesetzen und Vorschriften der EU erfolgen.

Info zu diesem Verkäufer

INDY-MOTORWERKS

99,4% positive Bewertungen94.657 Artikel verkauft

Mitglied seit Mai 1999
Antwortet meist innerhalb 12 Stunden
Angemeldet als gewerblicher Verkäufer
Indy-Motorwerks philosophy is to deliver quality products we believe in and use ourselves. We offer 100% satisfaction because we truly believe in our product.
Shop besuchenKontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten
Genaue Beschreibung
4.9
Angemessene Versandkosten
5.0
Lieferzeit
5.0
Kommunikation
5.0

Verkäuferbewertungen (46.455)

Alle Bewertungenselected
Positiv
Neutral
Negativ
  • y***j (239)- Bewertung vom Käufer.
    Letzter Monat
    Bestätigter Kauf
    Perfect fit
  • w***a (212)- Bewertung vom Käufer.
    Letzter Monat
    Bestätigter Kauf
    A+++ Ebayer
  • b***b (265)- Bewertung vom Käufer.
    Letzte 6 Monate
    Bestätigter Kauf
    As described thanks
Alle Bewertungen ansehen

Produktbewertungen & Rezensionen

4.6
50 Produktbewertungen
  • 39 Nutzer bewerten dieses Produkt mit 5 von 5 Sternen
  • 3 Nutzer bewerten dieses Produkt mit 4 von 5 Sternen
  • 6 Nutzer bewerten dieses Produkt mit 3 von 5 Sternen
  • 1 Nutzer bewerten dieses Produkt mit 2 von 5 Sternen
  • 1 Nutzer bewerten dieses Produkt mit 1 von 5 Sternen

Would recommend

Good value

Good quality

Relevanteste Rezensionen

  • Needs better attachment method.

    Removed the hood liner, placed flat on floor, used the supplied adhesive to attach the logo plate to the hood liner. Stood on the plate for 30 minutes. Let sit for three hours. Then drilled the three holes and added the bolts and nuts. Let sit overnight. Reinstalled the hood liner, everything looked great. After a few days, the metal plate pulled away from the hood liner, now I have a big gap behind the plate. I can easily put a paper towel down behind the logo plate (see photo). I plan to remove the whole thing, find some better glue and try again. Maybe put a slight bend in the metal logo plate to match the curve of the hood.

    Bestätigter Kauf: JaZustand: NeuVerkauft von: midwest-corvette

  • Wowsers Under the C6 Hood

    The wing emblem arrived quickly and was securely packaged. Instructions were good. The kit included everything needed for a good install. The wing logo itself is good quality steel; very smooth, even around the edges. The emblem photo was of very good quality and quite colorful, matching the Vette logo colors pretty well. Installation was a snap because I followed the enclosed instructions to a T. It is not necessary to smear the 2-part epoxy all over the back of the emblem, just in the 4 spots noted. I did add a bunch of wieght to the metal emblem after I had pressed it in place within the outlines of the embossed hood insulator, which did have to come off to make the application go easier. The only improvement I can suggest is that the polished stainless acorn nuts could be eliminated in ...

    Bestätigter Kauf: JaZustand: NeuVerkauft von: indy-motorwerks

  • Looks great, fits great with a little tweaking

    Nice item, coming with detailed instructions and two part epoxy, made of heavy metal. I removed the hood liner, it comes off easy using a trim tool, and with out damage to the plugs so they can be reused. The emblem is flat the hood liner is NOT, so to make the emblem fit the recess you need to bend it, the arrows in the pic show were I bent mine, I went slow and used my upper thigh and kept checking fitment. The instructions call for 4 locations of epoxy, I took an extra step and used a bead of construction adhesive, all the way around the edge, far enough in so there was no danger of it being pressed out. Then I applied weight and let it cure for 24 hours. I also installed the hardware. Make sure you bend it for fitment.

    Bestätigter Kauf: JaZustand: NeuVerkauft von: midwest-corvette

  • Fit and finish as advertised.

    This was as advertised, fit and finish was excellent. Just follow instructions for epoxy and make sure to put weight on each end of emblem once epoxied on hood liner, let sit for an hour or so, attached hardware and your good to go. Even with engine heat and AZ heat no issues so far.

    Bestätigter Kauf: JaZustand: NeuVerkauft von: midwest-corvette

  • My own installation plan.

    Beautiful colors. I hand formed it to fit the hood liner. It fits nicely. I installed the 3 bolts and it sets just right. For further peace of mind, I am going to epoxy it in. My plan is to scuff up the back side with fine sandpaper. Then I will put sand in a contractor’s trash bag to form for a mold. This will hold the form of the liner when I epoxy emblem to it. I plan to lay a towel over the emblem, then place another sand bag over the towel. I will add some weights to the sand bag and let it sit overnight.

    Bestätigter Kauf: JaZustand: NeuVerkauft von: midwest-corvette