LCD- & VFD-Zubehör

PLATINEN & ZUBEHÖR / PCP BOARD. Sie erwerben 1 Stück INVC831 HITACHI CCFL Backlight Inverter LCD TFT 6,5W! KABEL LITZE / CABLE LITZ WIRE. KABELBINDER / CABLE TIES. Backlight Inverter von TDK haben eine sehr hohe Qualitätsstufe.

Diese Anzeige ist eine sekundäre Anzeige und ist kein Ersatz für den Monitor oder TV verwendet, um dem Arduino selbst programmieren. GOLDELOX ProcessorBuilt-im umfangreichen 4DGL Grafiken und Bibliothek FunctionsFlash Systemspeicher für Benutzer CodeAudio Verstärker und LoudspeakermicroSD Karte socket2 X GPIO pinsI2C und UART serielle CommunicationsPowered von Arduino.

Keine Gewährleistung, keine Haftung.

Es ist fantastisch für Arduino basierte Projekt. Unten finden Sie eine automatische Übersetzung ins Deutsche.

MPN 1902283. Fotokopierer TLP521-4 cod. Für alle Streitigkeiten ist der Gerichtsstand das Gericht von Udine. EAN Non applicabile. ISBN Non applicabile. Unità di misura Unità.

MPN AD9887AKSZ-140. Anzeigetreiber, analoge Geräte.

Fügen Sie das Bild in die Nachricht ein und ein Mitarbeiter wird sofort antworten. Beachten Sie, dass nur weniger als 25% unseres Inventars auf e-bay gelistet sind.

MPN BEZ 700-IP. Unten finden Sie eine automatische Übersetzung ins Deutsche.

6 V, 24-Pin Htssop. Unten finden Sie eine automatische Übersetzung ins Deutsche.

The sensor display module SDEV011 is used together with the Nordo laser dust sensor SDS011 to display the sensor values and other extended functions. Other functions can be used to demonstrate the performance of the sensor, build a simple air quality detector, and can also be used as an embedded detection display module for the air-cleaning industry.

Model: XH-M452. Set [stop Humidity]: press and hold the "-" key to stop the humidity value from flashing. Use the /- keys to set the stop humidity value. Set [start humidity]: press and hold the “ ” key to start the humidity value flashing, and set the start humidity value with /- key.

1 x ADS1256 24-Bit ADC AD Module.

Output interface : 2.54mm pitch pin and SMA high-frequency connector.

Including AD9833, AD9834, AD9851, AD9854, and AD9954. 1 x Full Set Of DDS Drive Board. The communication interaction part retains the USB and USART interfaces. The upper computer can flexibly.

Bluetooth chip CSR8635, Bluetooth version 4.0 (also supports 2.0 2.1 3.0) faster transmission, better sound quality. With automatic audio signal switching function, add the Bluetooth function under the state of amplifier or active speaker; The automatic switching function: the default is the aux audio signal, and when there is a bluetooth signal, it is automatically switched to the bluetooth play mode, when the bluetooth playback is paused or no bluetooth signal will automatically switch to aux signal mode.

1 x UAF42 Active Filter Module. Strong applicability; Integrated with low-pass / high-pass / band-pass. Adopting UAF42AU chip; Accurate frequency and Q-value. Its neat layout is designed strictly in reference to filter circuit.

Using FSK / GFKS technology and LoRa (remote) spread spectrum technology. FC / air wake-up function / low power / carrier sense / FEC error correction / AEC encryption. Ultra-long distance transmission open up to 5KM.

Frequency range: 1Hz ~ 150KHz;. 5 x 1Hz-150Khz 3.3V-30V Signal Generator. set frequency of PWM. set PWM duty cycle. DXXX: set PWM duty cycle to XXX: (001 to 100). Such as D050, set PWM duty cycle is 50%.

Rated current: 15A. 1 X I ndustrial grade h igh power double motor driver module. Peak current: 30A. The motor is turning: DIR=1 PWM=PWM.

Simulation interface, you can upgrade serial peripherals. Provide RS232, RS485, RS422 interface. 20 x Adapter. Programming does not affect the target board program runs.

This is a special HIFI DAC expansion board for the Raspberry pi designed ,using TI's DAC chip (PCM5102A), using an I2S interface;. ·Digital Audio Interface :I2S. 1x Hi-Fi DAC Audio Sound Card Module. After the user can use this expansion board with audio playback systems (eg: volumio, xbmc system etc.) to build its own network HIFI player;.

The DS1307 can be easily connected to the Arduino, with I2C bus interface.

10 x 15KVE-1 boost coil. Output current: ≤0.4A. Input current: ≤2A. 10 x Row pin. Quantity: 10 sets.

1x TFT 2.4" LCD Touch Shield Expansion Shield. Am 04.11.17 hat der Verkäufer die folgenden Angaben hinzugefügt.

Simple operation, the vastmajority of serial instruction requires only one byte function can be realized. In addition, the module can also be a response from the PC programrelay status inquiries. Each has a LED indicator lights relay.

1 x H.265 Mstar Network Module. H.265/HEVC Main Profile/High Profile. Network Interface 10/100M adaptive Ethernet interface, lightning protection design, Differential mode> 2000V, Common mode> 6000V level.

Digital signal high-frequency attenuation resistor to isolate external high-frequency noise.

3 x 18650 Lithium Battery Boost Module (the battery does not includes). Battery box design, easy to remove and replace the battery.

3 x 18650 Lithium Battery Boost Module (the battery does not includes). Make sure that the soldering iron used is grounded (and the grounding wire is conductive). It is best to wear anti-static gloves.

[SONOFF RF Specification 1 x SONOFF RF Switch Socket Module. Supports 433MHz RF remote. 86 Wall Panel Wireless Transmitter Specification Wireless Frequency ]: 2.4Ghz. 1 x 86 Wall Panel Wireless Transmitter(Batteries not included).

TDA7492 amplifier module function 1 X TDA7492 digital HIFI power amplifier board with shell. Compared to other Class D amplifiers, the high chip area energy efficiency ratio also reduces crosstalk and improves sound quality.

10 x LM3915 Level Indicator Kit. Light row size: 62.5 x 5 x 10.7mm (L x W x H). Model: AUL-10.

Microchip Technology Inc's MCP9600 converts thermocouple EMF to degree Celsius with integrated cold-junction compensation. 1 x MCP9600 Dual 18-Bit Thermocouple to Digital Converter. 2-Wire Interface: I2C Compatible, 100kHz.

3 x HX711 Module. 3 x Weighing Sensor Load Cell. Green: A . Zero point temperature drift: 0.2% F.S / 10 ° C.

6: Use fast recovery diodes to prevent over-induction of electromotive force during motor start-up. 1 x H-bridge High Power DC Motor Drive Module. 7: NMOS tube with very low internal resistance of 3 milliohms.

Worldwide GSM GPRS 4-frequency System: 850/900/1800/1900MHz. - Remote Power-off: The device can be turned off through the APP on the guardian's cell phone. - Find Device: The lost device can be found through the APP on the cell phone.

Model: XH-M249. 5 x DC5V 6A Step Down Module. Output: 5V 6A.

Use 12864 LCD display. This module is a multichannel current signal generator that generates 4 channels 4~20mA current signal. Active output current 0~20mA. Output current: 4~20mA. 1 X Current signal generator module board.

3 x YX5300 MP3 Player Module. The Miniusb interface updates voice files no need installing any software. Supports XP and WIN7 systems. 30 Level voice are adjustable.

This module supports the UART interface, and supports the SPP Bluetooth serial port protocol, which has. The POS system, wireless keyboard and mouse;. This module is mainly used in the field of short distance wireless data transmission.

10 X Step down regulated power module. Output: 5V 3A (max). Efficiency: 92% (max). Working temperature: -40°C to 85°C.

Special design: Double filter structure is used to ensure sufficient suppression of out-of-band signals and effectively improve signal-to-noise ratio. Product Shell: CNC Machining Center CNC Milling.

This kit includes: TH38A12 module 300W high-definition M12IR-CUT Phoenix 4mm 300 million lens adjusting lens. 1 x TH38A12 Network Module. System structure Embedded RTOS design, dual-core 32-bit DSP (Hi3518EV200), hard compression, watchdog, 8MB FLASH, 64MB built-in DDR2.

Insert it into the soil, and then use the AD converter to read it. Sensor type: Analog Output. Prevent plant wilts know that this is caused by lack of water.

20 x A87 4 Channel Optocoupler Isolation Module. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. This module uses TLP281 chip (for Toshiba).

1 x H.265 Mstar Network Module. H.265/HEVC Main Profile/High Profile. Coding Format H.264 Main Profile/High Profile. Image Quality Saturation setting, contrast setting, sharpness setting, brightness setting, auto white balance, manual white balance setting, backlight compensation setting, strong light suppression setting, auto exposure, 2D/3D noise reduction intensity setting, fog setting, WDR mode strength settings.