Info
Alle Bewertungen (387)
- lsackett222 (8677)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat customer! Thank you for your purchase.
- customchainsawparts (213962)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufTHANK YOU FOR SHOPPING CUSTOMCHAINSAWPARTS GREAT CUSTOMER
- outdoorpowerequipment (136927)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufQuick response and fast payment. Perfect! THANKS!!
- yibei-tech (43314)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufQuick response and fast payment. Perfect! THANKS!!
- ganfeii1_4 (78749)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufGreat communication. A pleasure to do business with.
- reliableaftermarketpartsinc (663145)- Bewertung vom Käufer.Vor über einem JahrBestätigter KaufReliable Aftermarket Parts Tremendous Buyer!
Rezensionen (9)
21. Mär 2018
Great drill chuck and arbor for excellent price
I have to say I was impressed with look and feel of the chuck considering how cheap it was. It seems to be of decent quality and same general dimensions as the original chuck on the drill press. The original one had a serious wobble to it that I could not correct and for 13 bucks plus shipping i figured it was worth trying a new inexpensive chuck. It installed onto the arbor and onto the drill press quick and easy (few light hits with hammer). It seems to center well with small and larger bits (1/2") and it held well with 2 and 3" hole saw. I was pleasantly surprised after using it a few times. so far so good.
24. Mär 2019
Great value, works.
Great little unit to show time, temp and calendar. I needed an electronic thermometer for my workshop and this one had time and calendar as well. Just used 2 way tape to stick it to the wall.
06. Dez 2017
Super cheap and easy fix for old tecumseh engines
1 von 1 finden das hilfreich I used to fart around for hours with old corroded carbs (snowblowers, rototillers, mowers, chippers) and they sort of work ok and leak somewhat. This carb was only 9 bucks including shipping. Bolted it up in 5 mins and machine fired right up, smooth idle and no adjustments needed. I did check the screw on bottom of bowl and it was already set to 1.5 turns. did not check or adjust side set screw. I highly recommend this over messing with older carbs that leak or had water in them for long periods. I may try the same for my wood chipper (briggs).
I rarely have compression or spark issues on my Tecumseh engines - 99% of the time its the carb. Partly my fault for not covering engine when its outside in the weather.