Bewertungen und Rezensionen

Mehr erfahren

4.7

23 Produktbewertungen

18 Nutzer haben dieses Produkt mit 5 von 5 Sternen bewertet
4 Nutzer haben dieses Produkt mit 4 von 5 Sternen bewertet
0 Nutzer haben dieses Produkt mit 3 von 5 Sternen bewertet
0 Nutzer haben dieses Produkt mit 2 von 5 Sternen bewertet
1 Nutzer haben dieses Produkt mit 1 von 5 Sternen bewertet

Would recommend

Good value

Good quality

Relevanteste Rezensionen

Alle 14 Rezensionen sehen

von 6branch
13. Aug. 2016
Only one out there
This part looks well made but DO NOT over tighten this cap or the top will snap right off leaving you stranded on the lake. The cap is cut too deeply to allow space for the gasket and it leaves the top vunerable to break to easily. You cannot buy just the plastic cap but must pay $50.00 for the new assembly and I found nothing else that will work. When your cap starts to leak, just tighten it to snug or it will break. If it still leaks, buy or make a new gasket and try a snug fit again. Personally, I think this cap is poorly made and someone could make good money outsourcing an after market cap that is stronger. Brass would be nice. I now carry a recycled ketsup bottle top for a spare.
Bestätigter Kauf: JaArtikelzustand: Neu
von lbla3836
04. Jul. 2018
back on the water
Quality product easy to install
Bestätigter Kauf: JaArtikelzustand: Neu
von adaadafpmdhfuv
07. Sep. 2018
Thank you for supplying a quality product
Sensor matches and working properly Thank you for a quality component.
Bestätigter Kauf: JaArtikelzustand: Neu
von alaska_hobbit
14. Jun. 2017
Oil tank level sending unit
The factory cap (as well as this replacement) is a plastic cap with cork gasket and magnetic reed float switch. In order for the oil system to work, the cap needs to be tightened air tight onto the tank opening to prevent oil under pressure venting out of the cap and thereby draining the larger oil reservoir. The cap has vertical ridges around it's vertical portion that encloseds the tank opening's theads to aid in gripping the cap but unfortunatelyalso creates a weak joint where the veritcal threaded portion of the cap transitions to horizontal. By tightening the cap down onto the tank, the joint is placed under stress and can cause the cap to separate at the vertical to horiszontal transition, as mine did. Poor design as the ridges thin the cap material at the weak joint. I plan on adding material with a plastic welder to the outside of the cap at the horizontal-to-vertical transition to strengthen the lid. It is a critical component that should have been built stronger.
Bestätigter Kauf: JaArtikelzustand: Neu
von balls-123
08. Aug. 2018
oil cap and sending unit all in one
exact fit went right on
Bestätigter Kauf: JaArtikelzustand: Neu
von larrykri
12. Jun. 2018
Good quality
Fit and worked well
Bestätigter Kauf: JaArtikelzustand: Neu
von ernietronic73
06. Mai. 2017
Happy camper
Loved it,and my order got here quickly.
Bestätigter Kauf: JaArtikelzustand: Neu
von lgarry2012
23. Okt. 2017
Exact fit
If you have a cr5acked cap this is an exact replacement
Bestätigter Kauf: JaArtikelzustand: Neu
von bryanchevy
23. Apr. 2017
Wish cap was thicker
Cap needs to be thicker at top or even better made of aluminum or brass
Bestätigter Kauf: JaArtikelzustand: Neu
von boyzee_rizza
24. Jan. 2018
Very Hapy
Delivered as suggested and great product
Bestätigter Kauf: JaArtikelzustand: Neu