Details zu OPPO BDP 93 & 95 BLU-RAY REGION-FREE HARDWARE MOD KITOriginalangebot aufrufen
27. Dez. 2012 23:10:32 MEZ
Ca. EUR 58,09(einschließlich Versand)
New York, New York, Vereinigte Staaten von Amerika
||Region Code:||Region 0: All Regions|
IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT,
PLEASE LET US KNOW!
HARDWARE MODIFICATION KIT FOR OPPO DIGITAL BDP-93 / BDP-95 !!!
OPPO BLU-RAY PLAYER NOT INCLUDED!
ALLOWS FOR REGION-FREE PLAYBACK of BLU-RAY DISCs & DVDs!
TESTED AND 100% GUARANTEED TO WORK !!!
Tested and works perfectly with the latest BDP-93/95 firmware from March 29, 2011!
NO SOLDERING REQUIRED !! INSTALLATION IN ~2 MINUTES !!
FAST WORLDWIDE SHIPPING!
INSTALLATION SERVICE AVAILABLE: PLEASE CONTACT US!
If you already own an Oppo BDP-93, Oppo BDP-95, or the NuForce BDP-93, we can install the chip for you! Price includes the chip, internal installation & testing and customer is responsible for round trip freight.
Installation service for the BDP-93 or the BDP-93NE is $129 and for the BDP-95 is $279.
Item will be shipped from the USA by USPS. ITEM WILL BE SHIPPED ASAP. This listing is for a hardware modification kit only; NOT the Oppo BDP-93, BDP-95, or the NuForce BDP-93 player. This will NOT work for the BDP-80, BDP-83, BDP-83SE, BDP-103, BDP-105, or any other players.
Do It Yourself Region & Zone Kit (or “Kit”)
By successfully installing this Kit yourself, it will allow your Oppo BDP-93 / BDP-95 to now be REGION-FREE, Code-Free, Multi-Zone, Zone-Free, etc player. This will allow for:
1) Region-Free DVD
2) Remote DVD Region Selection 0-6 / Free
3) Remote Blu-ray Zone selection A, B or C
This Kit is compatible with the EU versions of the BDP-93/95 as well. This Kit will also work for the NuForce BDP-93 (similar installation). It is much more difficult to install this Kit INTERNALLY for the Oppo BDP-95 and not recommended unless you are an electronics professional.
INTERNAL INSTALLATION INSTRUCTIONS FOR OPPO BDP-93
1. Disconnect the main power cable. Remove the player’s top cover retaining screws, and then lift the rear of the top cover slowly at 45° while carefully pulling it free from the front panel. Note the yellow marked point where the cable must be inserted. Only one cable needs to be inserted.
(This is not the exact picture of the chip, but it is very similar.)
2. Attach the board to the side panel of the chassis. The board has double-adhesive tape for this. Since the USB cable of the Kit is not being used, you can cut this off.
3. Now the kit is ready for operation.
EXTERNAL INSTALLATION INSTRUCTIONS FOR OPPO BDP-93 and BDP-95
1. Disconnect the main power cable. Connect the RS232 port of the kit to the RS232 port of the Oppo.
2. Connect the USB cable to the USB port of the player.
3. Now the kit is ready for operation.
OPERATING INSTRUCTIONS FOR THE REGION-FREE KIT
By default, your Blu-ray player is region-free for DVD. To set the Blu-ray region to A, B or C, please do the following:
a. Power on the player without any disc inserted. After awhile, the screen with show "NO DISC".
b. About 2 seconds after the "NO DISC" is displayed, press DIMMER, DIMMER, DIMMER, MUTE and then the region code. 1 for A, 2 for B, 3 for C.
c. Power off your player. When started up again, the region code has changed.
The region code selection must be done within 20 seconds.
You player's firmware must be the BDP9x-42-0323 release or newer.
To select a specific DVD region, press DIMMER, DIMMER, DIMMER, PURE AUDIO, X, where X is the DVD region 0 to 6. Default is 0 (all regions / region-free).
This is aftermarket hardware which is not approved by OPPO Digital Inc. or NuForce Inc. Please install at your own risk. Installing this hardware requires you to open your player and make changes. While no soldering is required, this operation should not be taken lightly. We will not be held responsible for any damage caused to you or your player. Please purchase this DIY Kit only if you are completely comfortable with the internals of electronic equipment. Since you are opening up your player, this will cause the manufacturer’s warranty to be null and void. This Kit is an electrostatic sensitive device similar to most chipboards. Please take proper precautions.
SquareTrade © AP6.0