HP LASERJET 2400 2410 2420 2430 FUSER REPAIR PREMIUM A+

SquareTrade © AP6.0

YOU ARE BIDDING ON A PREMIUM QUALITY FUSER REBUILD KIT w/ GREASE TO REPAIR YOUR HP LASERJET 2400.  SYMPTOMS OF A BAD FUSER IS IT HAS BEGUN TO GIVE YOU SMEARED PRINTS DUE TO DAMAGE TO THE FUSER SLEEVE OR YOU SEE TEFLON FLAKING OFF ONTO THE PAPER AND HEARING A PAPER CRUNCHING NOISE WHEN PAPER RUNS THROUGH THE FUSER.  YOU MAY SEE DAMAGE TO THE HARD BLACK RUBBER PRESSURE ROLLER AS WELL.  THIS KIT REBUILDS THE FUSER AND SAVES YOU A LOT OF MONEY!

WHEN YOU SEE SUPER CHEAP SLEEVES PLEASE REALIZE THAT THIS IS A PART YOU DO NOT WANT TO BUY INFERIOR PRODUCTS FOR.  THE AMOUNT OF WORK TO REPLACE A SLEEVE IS CONSIDERABLE, DON'T FIND YOURSELF IN 1000 PAGES BACK IN THERE WITH ANOTHER TEAR.  TRUST ME IN THE 11+ YEARS OF EBAY I HAVE SEEN SUPPLIERS SLEEVES AND HAVE ONLY 1 VENDOR WHO OFFERS THE BEST ON THE MARKET.  YOU WILL BE IMPRESSED WITH THE FINISH AND QUALITY OF THE SLEEVES I SELL.  I WILL NOT SELL JUNK LIKE OTHER VENDORS DO. 

THIS KIT DOES NOT HAVE DIRECTIONS.   AGAIN, THIS HAS NO DIRECTIONS, THERE IS NO SUPPORT ON THIS PART.

FIGURE A REBUILT 30DAY WARRANTY FUSER IS 200+ DOLLARS + SHIPPING + RETURNING THE BAD FUSER.  SO FIGURE 250+ DOLLARS.  NOW CONSIDER SPENDING 1 HOUR YOURSELF AND FOR A FRACTION OF THE COST, DOING THE REBUILD YOURSELF.

IF YOU HAVE CONCERN OF "IS IT REALLY A BAD FUSER?", DO A 1/2 PAGE TEST.  PRINT A TEST PAGE AND WHEN THE PRINTER IS PULLING THE PAPER IN BUT BEFORE IT GETS INTO THE FUSER, TURN OFF THE PRINTER.  OPEN UP THE CARTRIDGE DOOR, REMOVE THE CARTRIDGE AND INSPECT THE PRINT.  IF THE PRINT LOOKS CLEAN AND GOOD, THEN THE FUSER HAS THE PROBLEMS.  TO CHECK THE SLEEVE, OPEN THE REAR DOOR AND LOOK AT THE GRAY SLEEVE - LOOKS LIKE A ROLLER AND IF YOU SEE ANY CUTS, TEARS OR TONER BUILDUP ON THE GRAY SLEEVE IT NEEDS TO BE REPLACED.  THE FUSER USUALLY GETS DAMAGED FROM IMPROPER PRINTED ITEMS (TRANSPARENCIES), OR LABELS.  THE SLEEVE IS THE MOST COMMON ISSUE BUT THERE IS A SMALL CHANCE THE ROLLER UNDER THE SLEEVE (ORANGE COLOR) CAN ALSO GET DAMAGED IF SOMEONE WAS STICKING SHARP OBJECTS INTO THE PRINTER TO CLEAR A JAM. 

 THE AUCTION INCLUDES THE FOLLOWING NEW PARTS:

 PREMIUM TEFLON FUSER SLEEVE (I PERSONALLY VERIFY EACH SLEEVE PRIOR TO SHIPMENT TO ENSURE YOU GET A PERFECT SLEEVE)  THESE SLEEVES ARE THE BEST AVAILABLE FOR YOUR PRINTER.  I HAVE FOUND THE BEST VENDORS AND DON'T OFFER TRASH PARTS AS SOME DO ON EBAY.  THESE SLEEVES ARE "NIGHT AND DAY" BETTER THAN WHAT YOUR PRINTER HAS CURRENTLY.

TEFLON SLEEVE GREASE (SMALL BAG NOT SHOWN)

FUSER PRESSURE ROLLER (2400 SERIES)

3 FUSER GEARS (331, 15T, 21T GEAR)

THESE PARTS COME WITH A 30 DAY VERIFY ITEMS ARE SHIPPED AND IN PROPER CONDITION.  ONCE YOU INSTALL THE PARTS, THE KIT CANNOT BE RETURNED.  PLEASE CHECK THE BOX AND THE SLEEVE AND ROLLER UPON RECEIPT FOR ANY SIGNS OF SHIPPING DAMAGE AND I WILL ACCEPT THE RETURN AND SHIP YOU A NEW KIT.  AFTER 30 DAYS OR YOU USE THE PARTS, THE KIT IS NON RETURNABLE FOR REFUND.   

SHIPPING:

SHIPPING IS VIA USPS PRIORITY MAIL W/ DELIVERY CONFIRMATION IN THE USA/PR.  SHIPPING INTERNATIONAL IS US POSTAL INTERNATIONAL FIRST CLASS MAIL WHICH TYPICALLY ARRIVES IN 5-10 BUSINESS DAYS.  PLEASE CHECK RATES BELOW FOR YOUR LOCATION.  IF YOU ARE NOT SURE PLEASE ASK.  THANK YOU! 

PAYMENT:

PAYMENT IS DUE IN 5 BUSINESS DAYS.  PLEASE CONTACT ME IF THIS IS A PROBLEM.  I ACCEPT PAYPAL, VISA/MC VIA PHONE/FAX/E-MAIL INFO, BUSINESS CHECKS.  PERSONAL CHECKS ARE WELCOME FROM ESTABLISHED EBAYERS WITH 25 OR BETTER FEEDBACK.

FEEDBACK:

I LEAVE FEEDBACK WHEN YOU PAY AND I SHIP.  MY FEEDBACK IS 100% CUSTOMER GIVEN ON A VOLUNTEER BASIS.  I DON'T USE THREATS TO MY CUSTOMERS LIKE THE COMPETITION.  YOU BOUGHT MY KIT AND PAID, YOU DID ALL YOU CAN, AND I LEAVE YOU FEEDBACK.  NOW I NEED TO MEET MY END OF THE BARGAIN.  THAT'S A HUGE DIFFERENCE IN WHO TO BUY FROM.  I HAVE GREAT FEEDBACK AND RETURN CUSTOMERS FOR A REASON.  I GIVE 110% TO MY CUSTOMERS.  EXPECT THE BEST FROM BUYING FROM ME.  YOU WILL BE IMPRESSED, SO FAR 11,000+ ARE!

BUY WITH CONFIDENCE!

Powered by eBay Turbo Lister