eBay
  • WOW! Angebote
  • Weihnachtswelt - Jetzt shoppen

Dieses Angebot wurde beendet. Der Verkäufer hat diesen oder einen gleichartigen Artikel wiedereingestellt.

 
Versand nach:
Lieferung:
Shop besuchen:
Unique.Buy Corpora...
 
Versand nach:

Details zu  Arduino Mega2560 AVR ATmega2560 ATMEGA8U2 + USB cable

Originalangebot aufrufen
Arduino Mega2560 AVR ATmega2560 ATMEGA8U2 + USB cable
Arduino-Mega2560-AVR-ATmega2560-ATMEGA8U2-USB-cable
Item Ended
Artikelzustand:
Neu
Beendet:
22. Mär. 2012 01:23:09 MEZ
Preis:
US $28,99
[
Übersicht:
]
 
Ca. EUR 23,22(einschließlich Versand)
Versand:
Kostenlos Economy Int'l Shipping | Weitere Details
Artikelstandort:
Guangdong, China

Beschreibung

eBay-Artikelnummer:
170797374188
Der Verkäufer ist für dieses Angebot verantwortlich.
Letzte Aktualisierung am  21. Mär. 2012 04:13:00 MEZ  Alle Änderungen anzeigen

Artikelmerkmale

Artikelzustand:
Neu: Neuer, unbenutzter und unbeschädigter Artikel in nicht geöffneter Originalverpackung (soweit eine ... Mehr zum Thema Zustand
 

Unique.Buy Corporation

Besuchen Sie meinen Shop  

Arduino Mega AVR ATmega2560 ATMEGA8U2 + USB cable

The name of your pic 
The name of your pic 
The name of your pic 
The name of your pic 

Overview

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 is an update to the Arduino Mega, which it replaces.

Schematic, Reference Design & Pin Mapping

EAGLE files: arduino-mega2560-reference-design.zip

Schematic: arduino-mega2560-schematic.pdf

Pin Mapping: PinMap2560 page

Summary

Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 14 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz

Power

The Arduino Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically.

External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into 
DFU mode.
Revision 3 of the board has the following new features:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.

The power pins are as follows:

  • VIN. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.

  • 5V. The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.

  • 3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 50 mA.

  • GND. Ground pins.

Memory

The ATmega2560 has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library).

Input and Output

Each of the 54 digital pins on the Mega can be used as an input or output, using pinMode(), digitalWrite(), anddigitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:

  • Serial: 0 (RX) and 1 (TX); Serial 1: 19 (RX) and 18 (TX); Serial 2: 17 (RX) and 16 (TX); Serial 3: 15 (RX) and 14 (TX). Used to receive (RX) and transmit (TX) TTL serial data. Pins 0 and 1 are also connected to the corresponding pins of the ATmega16U2 USB-to-TTL Serial chip.

  • External Interrupts: 2 (interrupt 0), 3 (interrupt 1), 18 (interrupt 5), 19 (interrupt 4), 20 (interrupt 3), and 21 (interrupt 2). These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.

  • PWM: 0 to 13. Provide 8-bit PWM output with the analogWrite() function.

  • SPI: 50 (MISO), 51 (MOSI), 52 (SCK), 53 (SS). These pins support SPI communication using the SPI library. The SPI pins are also broken out on the ICSP header, which is physically compatible with the Uno, Duemilanove and Diecimila.

  • LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.

  • TWI: 20 (SDA) and 21 (SCL). Support TWI communication using the Wire library. Note that these pins are not in the same location as the TWI pins on the Duemilanove or Diecimila.

The Mega2560 has 16 analog inputs, each of which provide 10 bits of resolution (i.e. 1024 different values). By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and analogReference() function.

There are a couple of other pins on the board:

  • AREF. Reference voltage for the analog inputs. Used with analogReference().

  • Reset. Bring this line LOW to reset the microcontroller. Typically used to add a reset button to shields which block the one on the board.

Communication

The Arduino Mega2560 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega2560 provides four hardware UARTs for TTL (5V) serial communication. AnATmega16U2 (ATmega 8U2 on the revision 1 and revision 2 boards) on the board channels one of these over USB and provides a virtual com port to software on the computer (Windows machines will need a .inf file, but OSX and Linux machines will recognize the board as a COM port automatically. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the board. The RX and TX LEDs on the board will flash when data is being transmitted via the ATmega8U2/ATmega16U2 chip and USB connection to the computer (but not for serial communication on pins 0 and 1).

A SoftwareSerial library allows for serial communication on any of the Mega2560's digital pins.

The ATmega2560 also supports TWI and SPI communication. The Arduino software includes a Wire library to simplify use of the TWI bus; see the documentation for details. For SPI communication, use the SPI library.

Programming

The Arduino Mega can be programmed with the Arduino software (download). For details, see the reference and tutorials.

The ATmega2560 on the Arduino Mega comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).

You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see these instructions for details.

The ATmega16U2 (or 8U2 in the rev1 and rev2 boards) firmware source code is available in the Arduino repository. TheATmega16U2/8U2 is loaded with a DFU bootloader, which can be activated by:

  • On Rev1 boards: connecting the solder jumper on the back of the board (near the map of Italy) and then resetting the 8U2.
  • On Rev2 or later boards: there is a resistor that pulling the 8U2/16U2 HWB line to ground, making it easier to put into DFU mode. You can then use Atmel's FLIP software (Windows) or the DFU programmer (Mac OS X and Linux) to load a new firmware. Or you can use the ISP header with an external programmer (overwriting the DFU bootloader). See this user-contributed tutorial for more information.

Automatic (Software) Reset

Rather then requiring a physical press of the reset button before an upload, the Arduino Mega2560 is designed in a way that allows it to be reset by software running on a connected computer. One of the hardware flow control lines (DTR) of the ATmega8U2 is connected to the reset line of the ATmega2560 via a 100 nanofarad capacitor. When this line is asserted (taken low), the reset line drops long enough to reset the chip. The Arduino software uses this capability to allow you to upload code by simply pressing the upload button in the Arduino environment. This means that the bootloader can have a shorter timeout, as the lowering of DTR can be well-coordinated with the start of the upload.

This setup has other implications. When the Mega2560 is connected to either a computer running Mac OS X or Linux, it resets each time a connection is made to it from software (via USB). For the following half-second or so, the bootloader is running on the Mega2560. While it is programmed to ignore malformed data (i.e. anything besides an upload of new code), it will intercept the first few bytes of data sent to the board after a connection is opened. If a sketch running on the board receives one-time configuration or other data when it first starts, make sure that the software with which it communicates waits a second after opening the connection and before sending this data.

The Mega2560 contains a trace that can be cut to disable the auto-reset. The pads on either side of the trace can be soldered together to re-enable it. It's labeled "RESET-EN". You may also be able to disable the auto-reset by connecting a 110 ohm resistor from 5V to the reset line; see this forum thread for details.

USB Overcurrent Protection

The Arduino Mega2560 has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Physical Characteristics and Shield Compatibility

The maximum length and width of the Mega2560 PCB are 4 and 2.1 inches respectively, with the USB connector and power jack extending beyond the former dimension. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

The Mega2560 is designed to be compatible with most shields designed for the Uno, Diecimila or Duemilanove. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, and ICSP header are all in equivalent locations. Further the main UART (serial port) is located on the same pins (0 and 1), as are external interrupts 0 and 1 (pins 2 and 3 respectively). SPI is available through the ICSP header on both the Mega2560 and Duemilanove / Diecimila. Please note that I2C is not located on the same pins on the Mega (20 and 21) as the Duemilanove / Diecimila (analog inputs 4 and 5).

 
Package Contents   
 
*  Arduino ATMEGA2560-16AU + USB Cable * 1set

The name of your pic 

Shipping Address

  • Item will ship to your Paypal Confirmed Address, so please make sure your shipping address is correct before you buy item.
  • Buyer need ship to other address (not Paypal confirmed address) should contact us before buy item. 
  • We have no responsiblity for shipping address provided wrongly.

Combined Shipping

  • Customer buy multiple items and need combine shipping, customer MUST contact us prior to buy. Send email to us and we will reply immediately.

Delivery Time

Below is the approximate delivery time to different countries (Estimate only):
The name of your pic
The name of your pic


The name of your pic 

Paypal Accepted and we proceed immediately. For other payment method, please e-mail us before you bid, thank you! 

   Replacement/Exchange

  • Exchange/replace item within 7-14 days counting from the day you receive merchandise.
  • Buyer will pay the return shipping cost regardless any reasons. No exception.
  • Exchange/replace item if only item is in same condition as when we shipped out. No exception.
  • Unwanted product returns will be subject to a 15% restocking fee and merchandise must be in the unused condition only.

    Ratings & Feedback

  • When you receive the shipment and satisfied with the product, please leave us positive feedback and 5 STAR scores DSR. We will do the same for you.
  • Please DO NOT open case with Ebay or leave neutral/negative feedback without any communication with us. If, for any reason you are not satisfied with your transaction, please contact us via Ebay Message or e-mail us and we will do our best to resolve the issue.

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Fragen und Antworten zu diesem Artikel

Zu diesem Artikel wurden keine Fragen und Antworten eingestellt.




00000

Bieten

Restzeit:
Aktuelles Gebot:
(Ungefähr ##1##)
Versand:
Einfuhrabgaben:
Ihr Maximalgebot:
Ihr Maximalgebot:
Hinweis: Ihr Gebot ist bindend. Wenn Sie auf Gebot bestätigen klicken und Höchstbietender sind, gehen Sie einen rechtsverbindlichen Vertrag mit dem Verkäufer ein. Die vollständige Artikelbeschreibung finden Sie unten.
Durch Klicken auf Gebot bestätigen verpflichten Sie sich, diesen Artikel zu kaufen, sofern Sie Höchstbietender sind. Des Weiteren bestätigen Sie, dass Sie die Allgemeinen Geschäftsbedingungen – wird in einem neuen Fenster oder Reiter geöffnet unseres Programms zum weltweiten Versand gelesen haben und diese akzeptieren. Zuvor angegebene Einfuhrabgaben können sich ändern, wenn Sie Ihr Maximalgebot erhöhen.
Im nächsten Schritt können Sie Ihr Maximalgebot bestätigen und die Versandkosten überprüfen.
Abbrechen
Laden...
Fahren Sie mit dem Bieten fort, wenn die Seite sich nicht sofort aktualisiert.
Bieten
Gebot überprüfen und bestätigen
Gebotsbestätigung
T
Std
Min
Sek
Tag
Stunde
Stunden
Kostenloser Versand
Siehe Artikelbeschreibung
(Ungefähr ##1##)
(Geben Sie mindestens ##1## ein.)
(Geben Sie mehr als ##1## ein)
Ihr Maximalgebot:
Maximalgebot erhöhen
Bieten
Gebot bestätigen
Maximalgebot erhöhen
Abbrechen
Gebot ändern
Schließen
, Sie wurden überboten. Bleiben Sie dran, bieten Sie erneut!
, Sie sind Höchstbietender für diesen Artikel. Wir drücken Ihnen die Daumen!
, Sie haben das erste Gebot abgegeben. Wir drücken Ihnen die Daumen!
, Sie sind derzeit Höchstbietender, können aber mit dem nächsten Gebot überboten werden.
, diese Auktion ist fast beendet, und Sie sind derzeit Höchstbietender.
, Sie sind derzeit Höchstbietender, aber der Mindestpreis wurde nicht erreicht.
Bitte geben Sie Ihr Gebot noch einmal ein.
Geben Sie als Preis bitte eine gültige Zahl ein.
Der Betrag, den Sie eingeben, muss mindestens so hoch wie das erforderliche Mindestgebot sein. Das erforderliche Mindestgebot wird unter dem Feld für die Gebotseingabe angezeigt.
Einmal abgegebene Maximalgebote können nicht mehr verringert werden.
Der Verkäufer verkauft diesen Artikel nur an Käufer mit PayPal-Konto. Richten Sie hier ein PayPal-Konto ein .
Ihr Gebot entspricht dem Sofort-Kaufen-Preis oder liegt darüber. Wir empfehlen Ihnen, den Artikel über die Sofort-Kaufen-Option zu erwerben. Wenn Sie dennoch ein Gebot abgeben möchten, können Sie dies weiter unten tun.
Restzeit:
Aktuelles Gebot:
(ungefähr ##1##)
Ihr Maximalgebot:
(ungefähr ##1##)
Erhöhen Sie Ihr Maximalgebot:
Durch Klicken auf 1-Klick-Gebot verpflichten Sie sich, diesen Artikel zu kaufen, wenn Sie Höchstbietender sind. Mehr zum Thema 1-Klick-Gebote – wird in einem neuen Fenster oder Reiter geöffnet
Tag
Stunde
Min.
Sek.
Tagen
Stunden
Minuten
Sekunden
(ungefähr ##1##)
Erfolgreiches Gebot:
Startpreis:
Schließen
Herzlichen Glückwunsch! Die Auktion ist beendet und Sie waren Höchstbietender.
Die Auktion ist beendet, aber der Mindestpreis wurde nicht erreicht.
Die Auktion ist beendet und Sie wurden leider überboten.
Glückwunsch, Sie sind Höchstbietender.
Sie wurden leider überboten.
Sie sind Höchstbietender, aber der Mindestpreis wurde nicht erreicht.
Geben Sie bitte ein Gebot ein, das höher als das aktuelle Gebot ist.
Einmal abgegebene Maximalgebote können nicht mehr verringert werden.
Bitte geben Sie eine gültige Zahl ein.